Balay Ovens Error Codes

E001

Oven will not heat; display shows E001 shortly after turning on any heating function.

Overtemperature safety cut-out / thermal fuse tripped

E002

Oven does not heat correctly; display shows E002 and beeps shortly after start.

Oven temperature sensor (NTC) fault

E003

Oven stops heating during use; display shows E003 and may switch off heating elements.

Cooling fan or ventilation fault

E005

Oven display shows E005, and controls are unresponsive or partially locked.

Touch control panel / keypad communication error

E006

Oven display shows E006, oven may not start or may shut down unexpectedly.

Main control board internal fault

E011

Oven shows E011 and will not start any heating program.

Door lock / door switch fault (models with pyrolytic cleaning or electronic lock)

E012

Oven shows E012; door remains locked after pyrolytic cleaning or will not lock to start cleaning.

Pyrolytic door locking system error

E015

Oven display shows E015; oven may shut down or not start.

Low or unstable mains voltage / power supply error

E016

Oven shows E016; backlight or display may flicker or go dark intermittently.

Display module / backlight power fault

E017

Oven shows E017; time and settings cannot be adjusted correctly.

Rotary selector / encoder fault

E018

Oven shows E018; some touch keys or buttons do not respond.

Keypad / touch sensor fault

E019

Oven shows E019; fan-assisted modes may not work correctly.

Convection fan motor fault

E020

Oven shows E020; grill function does not operate.

Grill heating circuit fault

E021

Oven shows E021; lower heating function not working.

Bottom heating element circuit fault

E022

Oven shows E022; fan runs but no heat in fan-assisted modes.

Ring (circular) heating element fault

E023

Oven displays E023; the interior light and some functions may not work.

Auxiliary Low-Voltage Circuit Fault

E024

Oven displays E024; steam-assisted or moisture functions do not operate (if equipped).

Steam Generator / Humidity System Fault

E025

Oven displays E025; the meat probe function is not available, or an error occurs when the probe is connected.

Meat Probe Sensor / Socket Fault

E030

Oven displays E030; the child lock symbol may appear, and controls do not respond.

Child Lock / Safety Lock Malfunction

E032

Oven displays E032; time-of-day or timer settings reset unexpectedly.

Real-Time Clock / Memory Backup Fault

E050

Oven displays E050; the gas burner will not ignite (for Balay gas ovens with electronic control).

Gas Ignition / Flame Detection Fault

E051

Oven displays E051 during gas operation; the burner shuts off shortly after ignition.

Flame Supervision / Flame Loss Fault

Symptom

Condensation dripping from the oven door or control panel during or after cooking.

Condensation management / door seal issue

Symptom

Oven display and controls dead, no lights or response, but mains supply is present.

No Power to Control Electronics

Symptom

Oven door does not close properly, heat escapes, and the front panel gets very hot.

Door Alignment / Hinge or Seal Failure

Symptom

Oven door glass fogging, moisture or streaks between inner and outer glass panes.

Door Glass Seal / Ventilation Issue

Symptom

Oven emits burning smell or smoke during normal cooking (not first use or after a spill).

Overheating Residue or Electrical Overheating

Symptom

Oven fan runs continuously even when the oven is off and cool.

Cooling Fan Control Fault

Symptom

Oven fan very noisy, rattling or grinding sound during operation.

Convection or Cooling Fan Mechanical Wear

Symptom

Oven interior light stays on all the time, even when the door is closed and the oven is off.

Door switch or light control fault

Symptom

Oven light not working, but the oven heats normally.

Oven Cavity Lamp Failure

Symptom

Oven makes loud banging or popping noises when heating or cooling.

Thermal Expansion Noise / Loose Panels

Symptom

Oven timer and clock work, but heating only starts when the timer is set in a certain way.

Programmer / Timer Misconfiguration or Fault

Symptom

Oven trips the circuit breaker or RCD when turned on or during heating.

Electrical Short or Earth Leakage

Symptom

Pyrolytic self-cleaning cycle will not start; the oven otherwise works.

Pyrolytic safety interlock fault

Symptom

The oven causes kitchen cabinets or the worktop to overheat or discolor.

Ventilation / installation fault

Symptom

The oven display works, but buttons or knobs do not respond or respond intermittently.

User interface input failure

Symptom

The oven does not heat at all; no error code is displayed, and the fan and light may still work.

General Heating Circuit Failure

Symptom

The oven heats but does not reach the set temperature; food is undercooked, or cooking times are much longer than expected.

Temperature Regulation / Calibration Fault

Symptom

The oven overheats, burning food even at low temperature settings, and exterior surfaces become very hot.

Runaway Heating / Thermostat Failure

Symptom

Uneven baking: the back of the oven burns food while the front remains undercooked.

Air circulation / element distribution issue