GE Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
Door
Display shows 'Door' or 'DOOR', and the oven will not start bake or clean cycles.
Door switch or lock position not detected.
ERR
Display shows 'ERR' when setting temperature or time.
Invalid keypad entry or control input error.
F0
GE oven beeps and displays F0, often intermittently, sometimes when not in use
Stuck or shorted oven keypad
F1
GE oven displays F1 and may beep continuously, often when idle
Internal oven control failure or keypad short
F10
GE oven displays F10 and may overheat or shut down.
Runaway temperature / sensor out of range.
F2
GE oven shows F2 and may shut off during a bake or broil cycle, often when very hot
Oven over-temperature condition
F20
GE oven displays F20 and will not start a bake or clean cycle.
Communication error between user interface and control board.
F3
GE oven displays F3 and will not heat or stops mid-cycle
Open or shorted oven temperature sensor circuit
F30
GE oven displays F30 and may not heat correctly.
Lower oven temperature sensor circuit fault (for double ovens).
F31
GE oven displays F31, often associated with the upper oven on double units.
Upper oven temperature sensor circuit fault.
F34
GE oven displays F34 and may not start a clean cycle.
Door lock circuit error (often lower oven on double units).
F4
GE oven shows F4 and may not start or may shut off unexpectedly
Shorted oven temperature sensor circuit
F60
GE oven displays F60 and may not respond to touch inputs.
User interface (UI) communication or power error.
F63
GE oven displays F63 and may not start or complete cycles.
Configuration or calibration error in control board.
F7
GE oven displays F7, often with beeping and unresponsive or erratic keypad
Keypad short or control board key input failure
F8
GE oven shows F8 and may not heat properly or may shut off
Oven over-temperature or runaway temperature condition
F9
GE oven displays F9 and the door may remain locked after self-clean or will not lock
Oven door lock circuit failure
F9E0
GE oven displays F9E0 or a similar code related to door lock communication.
Door lock motor communication or position error.
LOC
Display shows LOC or 'Control Locked' and the oven will not start.
Control lock feature enabled.
LOCKED DOOR
Display indicates 'LOCKED DOOR' and the door will not open after self-clean.
Door lock stuck in locked position.
PF
Display shows 'PF', and the clock resets after a power interruption.
Power failure indication.
Probe
Display shows 'Probe' or 'PROBE', and the oven will not start a normal bake.
Meat probe circuit detected as connected.
SAB
Display shows 'SAB' or 'Sabbath mode'; oven appears unresponsive to normal controls.
Sabbath mode enabled.
Symptom
Bake element not heating, but broil works.
Open bake heating circuit.
Symptom
Broil element not heating, but bake works.
Open broil heating circuit.
Symptom
Clock and timer work, but the oven will not start when pressing START.
Start circuit or safety interlock issue
Symptom
Control panel is completely dead (no display, no lights).
Loss of control power
Symptom
Control panel lights up, but buttons do not respond or respond intermittently.
Keypad or touch control failure
Symptom
Convection fan not running in convection mode.
Convection fan motor failure.
Symptom
Gas GE oven (dual-fuel or gas model) will not ignite in bake mode.
Bake ignition failure
Symptom
Gas GE oven broiler will not ignite, but bake works.
Broil ignition failure
Symptom
Oven display is very dim or unreadable but functions otherwise.
Weak display illumination
Symptom
Oven door glass is cracked or shattered.
Door glass failure
Symptom
Oven door will not close fully or has a gap, causing heat loss.
Door alignment or hinge failure
Symptom
Oven door will not open after normal bake (no self-clean used).
Door latch jammed or misaligned
Symptom
Oven heats but does not reach the set temperature or cooks food unevenly.
Temperature regulation or calibration issue.
Symptom
Oven leaks heat, and the outer door gets extremely hot to the touch.
Insulation or door seal failure
Symptom
Oven light will not turn on, but the oven heats normally.
Oven cavity light circuit failure
Symptom
Oven produces excessive smoke during use (not self-clean).
Combustion of food residue or coating burn-off
Symptom
Oven shuts off by itself during baking and returns to the clock display.
Unexpected cycle termination
Symptom
Oven takes a very long time to preheat.
Reduced heating performance
Symptom
Oven temperature fluctuates widely during baking.
Unstable temperature control
Symptom
Oven will not heat at all (no bake or broil), but the control panel lights up.
No power to heating elements.
Symptom
Self-clean will not start; oven beeps and cancels.
Self-clean safety interlock failure
Symptom
Strong chemical or burning plastic smell when the oven is used.
Off-gassing or foreign material burning
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| Door |
Display shows 'Door' or 'DOOR', and the oven will not start bake or clean cycles.
|
Door switch or lock position not detected. | View Details |
| ERR |
Display shows 'ERR' when setting temperature or time.
|
Invalid keypad entry or control input error. | View Details |
| F0 |
GE oven beeps and displays F0, often intermittently, sometimes when not in use
|
Stuck or shorted oven keypad | View Details |
| F1 |
GE oven displays F1 and may beep continuously, often when idle
|
Internal oven control failure or keypad short | View Details |
| F10 |
GE oven displays F10 and may overheat or shut down.
|
Runaway temperature / sensor out of range. | View Details |
| F2 |
GE oven shows F2 and may shut off during a bake or broil cycle, often when very hot
|
Oven over-temperature condition | View Details |
| F20 |
GE oven displays F20 and will not start a bake or clean cycle.
|
Communication error between user interface and control board. | View Details |
| F3 |
GE oven displays F3 and will not heat or stops mid-cycle
|
Open or shorted oven temperature sensor circuit | View Details |
| F30 |
GE oven displays F30 and may not heat correctly.
|
Lower oven temperature sensor circuit fault (for double ovens). | View Details |
| F31 |
GE oven displays F31, often associated with the upper oven on double units.
|
Upper oven temperature sensor circuit fault. | View Details |
| F34 |
GE oven displays F34 and may not start a clean cycle.
|
Door lock circuit error (often lower oven on double units). | View Details |
| F4 |
GE oven shows F4 and may not start or may shut off unexpectedly
|
Shorted oven temperature sensor circuit | View Details |
| F60 |
GE oven displays F60 and may not respond to touch inputs.
|
User interface (UI) communication or power error. | View Details |
| F63 |
GE oven displays F63 and may not start or complete cycles.
|
Configuration or calibration error in control board. | View Details |
| F7 |
GE oven displays F7, often with beeping and unresponsive or erratic keypad
|
Keypad short or control board key input failure | View Details |
| F8 |
GE oven shows F8 and may not heat properly or may shut off
|
Oven over-temperature or runaway temperature condition | View Details |
| F9 |
GE oven displays F9 and the door may remain locked after self-clean or will not lock
|
Oven door lock circuit failure | View Details |
| F9E0 |
GE oven displays F9E0 or a similar code related to door lock communication.
|
Door lock motor communication or position error. | View Details |
| LOC |
Display shows LOC or 'Control Locked' and the oven will not start.
|
Control lock feature enabled. | View Details |
| LOCKED DOOR |
Display indicates 'LOCKED DOOR' and the door will not open after self-clean.
|
Door lock stuck in locked position. | View Details |
| PF |
Display shows 'PF', and the clock resets after a power interruption.
|
Power failure indication. | View Details |
| Probe |
Display shows 'Probe' or 'PROBE', and the oven will not start a normal bake.
|
Meat probe circuit detected as connected. | View Details |
| SAB |
Display shows 'SAB' or 'Sabbath mode'; oven appears unresponsive to normal controls.
|
Sabbath mode enabled. | View Details |
| – |
Bake element not heating, but broil works.
|
Open bake heating circuit. | View Details |
| – |
Broil element not heating, but bake works.
|
Open broil heating circuit. | View Details |
| – |
Clock and timer work, but the oven will not start when pressing START.
|
Start circuit or safety interlock issue | View Details |
| – |
Control panel is completely dead (no display, no lights).
|
Loss of control power | View Details |
| – |
Control panel lights up, but buttons do not respond or respond intermittently.
|
Keypad or touch control failure | View Details |
| – |
Convection fan not running in convection mode.
|
Convection fan motor failure. | View Details |
| – |
Gas GE oven (dual-fuel or gas model) will not ignite in bake mode.
|
Bake ignition failure | View Details |
| – |
Gas GE oven broiler will not ignite, but bake works.
|
Broil ignition failure | View Details |
| – |
Oven display is very dim or unreadable but functions otherwise.
|
Weak display illumination | View Details |
| – |
Oven door glass is cracked or shattered.
|
Door glass failure | View Details |
| – |
Oven door will not close fully or has a gap, causing heat loss.
|
Door alignment or hinge failure | View Details |
| – |
Oven door will not open after normal bake (no self-clean used).
|
Door latch jammed or misaligned | View Details |
| – |
Oven heats but does not reach the set temperature or cooks food unevenly.
|
Temperature regulation or calibration issue. | View Details |
| – |
Oven leaks heat, and the outer door gets extremely hot to the touch.
|
Insulation or door seal failure | View Details |
| – |
Oven light will not turn on, but the oven heats normally.
|
Oven cavity light circuit failure | View Details |
| – |
Oven produces excessive smoke during use (not self-clean).
|
Combustion of food residue or coating burn-off | View Details |
| – |
Oven shuts off by itself during baking and returns to the clock display.
|
Unexpected cycle termination | View Details |
| – |
Oven takes a very long time to preheat.
|
Reduced heating performance | View Details |
| – |
Oven temperature fluctuates widely during baking.
|
Unstable temperature control | View Details |
| – |
Oven will not heat at all (no bake or broil), but the control panel lights up.
|
No power to heating elements. | View Details |
| – |
Self-clean will not start; oven beeps and cancels.
|
Self-clean safety interlock failure | View Details |
| – |
Strong chemical or burning plastic smell when the oven is used.
|
Off-gassing or foreign material burning | View Details |
No matching codes found
Advertisements