Severin Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Oven does not heat, display shows E0 shortly after power-on.
Temperature Sensor (NTC) Open Circuit
E1
Oven overheats quickly, display shows E1 and heating stops.
Temperature Sensor (NTC) Short Circuit / Out of Range Low
E2
Oven does not heat correctly, fan may run, display shows E2.
Cavity Overheat / Safety Thermostat Tripped
E3
Oven display shows E3, no heating; internal light may still work.
Main Heating Element Circuit Fault
E4
Display shows E4; oven fan runs but temperature does not rise properly.
Fan-Assisted Heating Element Fault
E5
Oven display shows E5, beeps, and stops heating shortly after start.
Door Switch / Door Lock Fault (Electronic Models)
E6
Oven display shows E6; no response to temperature or mode selection.
Control PCB Communication / Internal Fault
E7
Oven display shows E7; fan may run intermittently, heating disabled.
Cooling Fan Motor Fault
E8
Oven display shows E8; interior light may flicker, some functions unavailable.
Low Voltage / Power Supply Fault
E9
Oven display shows E9; timer works but heating and fan are disabled.
Relay Drive / Output Stage Fault
F1
Oven beeps and shows F1; keys may not respond correctly.
Keypad / Touch Control Fault
F2
Oven shows F2 and shuts off during cooking, often at high temperatures.
Overtemperature Protection / Cavity Sensor Error at High Temp
F3
Oven shows F3; grill function inoperative while other modes may work.
Grill Heating Element Circuit Fault
F4
Oven shows F4; interior light and fan may work, but no heat in any mode.
Thermal Fuse Open / Safety Cut-Out Activated
F5
Oven shows F5; timer works, but elements and fan do not start.
Function Selector Switch Fault (Mechanical Selector Models)
F6
Oven shows F6; time display may flash, and the oven cannot be started.
Clock / Timer Module Fault or Not Set
F7
Oven shows F7; fan runs, but the temperature is unstable or incorrect.
Temperature Calibration / Sensor Offset Error
F8
Oven shows F8; interior light and fan may cycle on/off unexpectedly.
Triac / Solid-State Output Fault (for light or fan)
F9
Oven shows F9, beeping, no heating, often after a power surge.
EEPROM / Memory Error
Symptom
Condensation forms on oven door and control panel during cooking
Normal Condensation / Venting Issue
Symptom
Oven cavity light and fan turn on by themselves when oven is off (cooling cycle)
Extended Cooling Fan Operation
Symptom
Oven display flickers or dims when heating turns on
Voltage Drop / Poor Connection
Symptom
Oven does not heat at all; no error code on display; light and clock work.
Open Heating Circuit / No Power to Elements
Symptom
Oven enamel or interior coating is chipped or flaking
Cavity Coating Damage
Symptom
Oven heats but cannot reach the set temperature; food is undercooked; no error code.
Weak or Partially Failed Heating Element
Symptom
Oven light works, but the fan does not run in convection mode.
Convection Fan Motor Failure
Symptom
Oven overheats, burning food even at low settings, and shows no error code.
Stuck Thermostat or Sensor / Control Failure
Symptom
Oven racks do not slide smoothly or are tilting
Deformed Rack Guides / Rails
Symptom
Oven selector knob very stiff or cannot be turned through all positions
Seized Function Selector Switch
Symptom
Oven temperature knob turns but has no effect on heating level
Mechanical Thermostat Shaft / Potentiometer Failure
Symptom
The oven display and controls are dead; there are no lights and no response.
No Power / Supply Failure
Symptom
The oven display works, but heating only starts when the timer is set.
Timer Not in Manual Mode
Symptom
The oven door glass is loose or rattling.
Inner/Outer Door Glass Mounting Failure
Symptom
The oven door will not close fully, heat escapes, leading to poor cooking performance.
Door Hinge / Door Seal Misalignment
Symptom
The oven door will not open after cooking; there is no visible lock indicator.
Thermal Door Lock Stuck (Self-Cooling / Safety Lock Models)
Symptom
The oven emits a burning smell or smoke during use (not new-oven burn-in).
Contamination on Elements / Insulation Overheating
Symptom
The oven interior light does not work; all other functions are normal.
Oven Lamp / Lamp Holder Failure
Symptom
The oven makes a loud rattling or grinding noise when the fan is running.
Fan Blade or Motor Bearing Wear
Symptom
The oven trips the circuit breaker or RCD when turned on.
Earth Leakage / Short Circuit in Heating Circuit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Oven does not heat, display shows E0 shortly after power-on.
|
Temperature Sensor (NTC) Open Circuit | View Details |
| E1 |
Oven overheats quickly, display shows E1 and heating stops.
|
Temperature Sensor (NTC) Short Circuit / Out of Range Low | View Details |
| E2 |
Oven does not heat correctly, fan may run, display shows E2.
|
Cavity Overheat / Safety Thermostat Tripped | View Details |
| E3 |
Oven display shows E3, no heating; internal light may still work.
|
Main Heating Element Circuit Fault | View Details |
| E4 |
Display shows E4; oven fan runs but temperature does not rise properly.
|
Fan-Assisted Heating Element Fault | View Details |
| E5 |
Oven display shows E5, beeps, and stops heating shortly after start.
|
Door Switch / Door Lock Fault (Electronic Models) | View Details |
| E6 |
Oven display shows E6; no response to temperature or mode selection.
|
Control PCB Communication / Internal Fault | View Details |
| E7 |
Oven display shows E7; fan may run intermittently, heating disabled.
|
Cooling Fan Motor Fault | View Details |
| E8 |
Oven display shows E8; interior light may flicker, some functions unavailable.
|
Low Voltage / Power Supply Fault | View Details |
| E9 |
Oven display shows E9; timer works but heating and fan are disabled.
|
Relay Drive / Output Stage Fault | View Details |
| F1 |
Oven beeps and shows F1; keys may not respond correctly.
|
Keypad / Touch Control Fault | View Details |
| F2 |
Oven shows F2 and shuts off during cooking, often at high temperatures.
|
Overtemperature Protection / Cavity Sensor Error at High Temp | View Details |
| F3 |
Oven shows F3; grill function inoperative while other modes may work.
|
Grill Heating Element Circuit Fault | View Details |
| F4 |
Oven shows F4; interior light and fan may work, but no heat in any mode.
|
Thermal Fuse Open / Safety Cut-Out Activated | View Details |
| F5 |
Oven shows F5; timer works, but elements and fan do not start.
|
Function Selector Switch Fault (Mechanical Selector Models) | View Details |
| F6 |
Oven shows F6; time display may flash, and the oven cannot be started.
|
Clock / Timer Module Fault or Not Set | View Details |
| F7 |
Oven shows F7; fan runs, but the temperature is unstable or incorrect.
|
Temperature Calibration / Sensor Offset Error | View Details |
| F8 |
Oven shows F8; interior light and fan may cycle on/off unexpectedly.
|
Triac / Solid-State Output Fault (for light or fan) | View Details |
| F9 |
Oven shows F9, beeping, no heating, often after a power surge.
|
EEPROM / Memory Error | View Details |
| – |
Condensation forms on oven door and control panel during cooking
|
Normal Condensation / Venting Issue | View Details |
| – |
Oven cavity light and fan turn on by themselves when oven is off (cooling cycle)
|
Extended Cooling Fan Operation | View Details |
| – |
Oven display flickers or dims when heating turns on
|
Voltage Drop / Poor Connection | View Details |
| – |
Oven does not heat at all; no error code on display; light and clock work.
|
Open Heating Circuit / No Power to Elements | View Details |
| – |
Oven enamel or interior coating is chipped or flaking
|
Cavity Coating Damage | View Details |
| – |
Oven heats but cannot reach the set temperature; food is undercooked; no error code.
|
Weak or Partially Failed Heating Element | View Details |
| – |
Oven light works, but the fan does not run in convection mode.
|
Convection Fan Motor Failure | View Details |
| – |
Oven overheats, burning food even at low settings, and shows no error code.
|
Stuck Thermostat or Sensor / Control Failure | View Details |
| – |
Oven racks do not slide smoothly or are tilting
|
Deformed Rack Guides / Rails | View Details |
| – |
Oven selector knob very stiff or cannot be turned through all positions
|
Seized Function Selector Switch | View Details |
| – |
Oven temperature knob turns but has no effect on heating level
|
Mechanical Thermostat Shaft / Potentiometer Failure | View Details |
| – |
The oven display and controls are dead; there are no lights and no response.
|
No Power / Supply Failure | View Details |
| – |
The oven display works, but heating only starts when the timer is set.
|
Timer Not in Manual Mode | View Details |
| – |
The oven door glass is loose or rattling.
|
Inner/Outer Door Glass Mounting Failure | View Details |
| – |
The oven door will not close fully, heat escapes, leading to poor cooking performance.
|
Door Hinge / Door Seal Misalignment | View Details |
| – |
The oven door will not open after cooking; there is no visible lock indicator.
|
Thermal Door Lock Stuck (Self-Cooling / Safety Lock Models) | View Details |
| – |
The oven emits a burning smell or smoke during use (not new-oven burn-in).
|
Contamination on Elements / Insulation Overheating | View Details |
| – |
The oven interior light does not work; all other functions are normal.
|
Oven Lamp / Lamp Holder Failure | View Details |
| – |
The oven makes a loud rattling or grinding noise when the fan is running.
|
Fan Blade or Motor Bearing Wear | View Details |
| – |
The oven trips the circuit breaker or RCD when turned on.
|
Earth Leakage / Short Circuit in Heating Circuit | View Details |
No matching codes found
Advertisements