Avanti Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
E0 error on Avanti gas cooktop with electronic ignition; burners will not ignite from knobs.
Ignition System Fault or No Spark Detected
E1
E1 error on Avanti electric cooktop; one or more heating zones do not respond.
Cooktop Sensor or Touch Control Communication Error
E2
E2 error on Avanti electric cooktop; affected zone shuts down or will not heat.
Cooktop Over-Temperature or Sensor Fault
E3
E3 error on Avanti induction or electronic cooktop; zone will not heat and may beep.
Cookware Detection or Induction Coil Fault
E4
E4 error on Avanti induction cooktop; unit may shut down or refuse to start.
Internal Over-Temperature or Cooling Fan Failure
E5
E5 error on Avanti induction or electronic cooktop; unit may not power on or shuts off quickly.
Supply Voltage Out of Range or Power Board Fault
E6
E6 error on Avanti induction cooktop; one or more zones disabled.
Internal Communication Error Between Touch Control and Power Module
ERR
ERR or error appears on Avanti cooktop or range display when setting temperature or timer; function will not start.
Invalid Key Entry or Control Logic Error.
F1
Electronic control beeps continuously, oven will not operate or shuts off, F1 displayed on Avanti range control panel.
Electronic Oven Control (EOC) Keypad or Control Board Failure.
F2
Oven overheats, temperature much higher than set, F2 error on Avanti range display, sometimes with beeping and automatic shutoff.
Oven Over-Temperature or Shorted Temperature Sensor Circuit.
F3
Avanti oven will not heat properly, F3 error displayed, sometimes appears shortly after starting a bake cycle.
Open or Shorted Oven Temperature Sensor Circuit.
F4
Intermittent F4 error on Avanti oven, oven may shut off mid-cycle or fail to start, often related to temperature sensing.
Intermittent Oven Temperature Sensor or Sensor Circuit Fault.
F5
F5 error on Avanti range display, oven functions may be disabled, often appears immediately on power-up.
Oven Door Lock or Latch Switch Circuit Failure (self-clean models).
F7
F7 error on Avanti range, random beeping, keys may not respond or multiple keys appear pressed.
Stuck or Shorted Keypad on Electronic Control.
F9
F9 error on Avanti oven, door may remain locked after self-clean or will not lock when starting self-clean.
Oven Door Lock Failure or Door Lock Circuit Error.
LOC
Control panel displays LOC or a lock icon on Avanti range; oven and sometimes cooktop controls do not respond.
Control Panel Child Lock / Control Lock Activated.
PF
PF or power failure message on Avanti range display, clock resets, oven cancels cooking cycle.
Power Failure or Voltage Interruption Detected by Control.
Symptom
Clock and display are blank on Avanti range, but surface elements may still work (on some models).
Control Power Loss or Failed Display Board
Symptom
Control knobs on an Avanti range are hard to turn or feel loose.
Worn or Contaminated Control Knobs / Valve Stems
Symptom
Cooktop electric elements on an Avanti range cycle on and off rapidly or do not maintain low heat
Surface Element Temperature Control Issue
Symptom
Cooktop gas burners click but do not light or take a long time to light on Avanti gas range
Delayed or Failed Surface Burner Ignition
Symptom
Cooktop gas burners will not ignite; no clicking sound on Avanti gas range
Surface Burner Ignition System Failure
Symptom
Electric oven heats but takes excessively long to reach temperature on Avanti range
Partial Oven Heating or Weak Element
Symptom
Electric oven will not heat on Avanti electric range; display and lights work, but no bake or broil.
Oven Heating Circuit Failure
Symptom
Excessive smoke from the oven during use on an Avanti range.
Burn-off of Spills or Contaminants
Symptom
Gas oven lights, but temperature is inaccurate or fluctuates widely on Avanti gas range.
Oven Temperature Regulation Problem
Symptom
Gas oven will not ignite, no heat, but cooktop burners work on Avanti gas range.
Oven Ignition Failure
Symptom
One electric cooktop element on an Avanti range does not heat; others work normally
Single Surface Element Failure
Symptom
Oven door will not close fully or does not seal on an Avanti range
Oven Door Alignment or Hinge Failure
Symptom
Oven door will not open after a self-clean cycle on an Avanti range (no F-code displayed)
Stuck Oven Door Lock Mechanism
Symptom
Oven light does not work on an Avanti range, but the oven heats normally
Oven Cavity Lighting Failure
Symptom
Oven or cooktop flames are yellow and produce soot on an Avanti gas range
Improper Gas-Air Mixture / Incomplete Combustion
Symptom
Range leveling is off; oven racks are not level, and liquids bake unevenly in an Avanti range.
Improper Range Leveling / Installation
Symptom
Range trips breaker when the oven or cooktop is turned on (Avanti electric range).
Electrical Short or Overcurrent
Symptom
Strong gas smell around an Avanti gas range when burners or the oven are in use
Gas Leak or Incomplete Combustion
Symptom
The cooktop glass is cracked or shattered on an Avanti electric or induction cooktop.
Damaged Ceramic Glass Top
Symptom
The oven makes loud popping or banging noises during heating or cooling on an Avanti range.
Thermal Expansion Noise or Loose Components
Symptom
The oven temperature display does not match the actual temperature on an Avanti electronic range (but the oven otherwise heats).
Oven Temperature Calibration Offset
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
E0 error on Avanti gas cooktop with electronic ignition; burners will not ignite from knobs.
|
Ignition System Fault or No Spark Detected | View Details |
| E1 |
E1 error on Avanti electric cooktop; one or more heating zones do not respond.
|
Cooktop Sensor or Touch Control Communication Error | View Details |
| E2 |
E2 error on Avanti electric cooktop; affected zone shuts down or will not heat.
|
Cooktop Over-Temperature or Sensor Fault | View Details |
| E3 |
E3 error on Avanti induction or electronic cooktop; zone will not heat and may beep.
|
Cookware Detection or Induction Coil Fault | View Details |
| E4 |
E4 error on Avanti induction cooktop; unit may shut down or refuse to start.
|
Internal Over-Temperature or Cooling Fan Failure | View Details |
| E5 |
E5 error on Avanti induction or electronic cooktop; unit may not power on or shuts off quickly.
|
Supply Voltage Out of Range or Power Board Fault | View Details |
| E6 |
E6 error on Avanti induction cooktop; one or more zones disabled.
|
Internal Communication Error Between Touch Control and Power Module | View Details |
| ERR |
ERR or error appears on Avanti cooktop or range display when setting temperature or timer; function will not start.
|
Invalid Key Entry or Control Logic Error. | View Details |
| F1 |
Electronic control beeps continuously, oven will not operate or shuts off, F1 displayed on Avanti range control panel.
|
Electronic Oven Control (EOC) Keypad or Control Board Failure. | View Details |
| F2 |
Oven overheats, temperature much higher than set, F2 error on Avanti range display, sometimes with beeping and automatic shutoff.
|
Oven Over-Temperature or Shorted Temperature Sensor Circuit. | View Details |
| F3 |
Avanti oven will not heat properly, F3 error displayed, sometimes appears shortly after starting a bake cycle.
|
Open or Shorted Oven Temperature Sensor Circuit. | View Details |
| F4 |
Intermittent F4 error on Avanti oven, oven may shut off mid-cycle or fail to start, often related to temperature sensing.
|
Intermittent Oven Temperature Sensor or Sensor Circuit Fault. | View Details |
| F5 |
F5 error on Avanti range display, oven functions may be disabled, often appears immediately on power-up.
|
Oven Door Lock or Latch Switch Circuit Failure (self-clean models). | View Details |
| F7 |
F7 error on Avanti range, random beeping, keys may not respond or multiple keys appear pressed.
|
Stuck or Shorted Keypad on Electronic Control. | View Details |
| F9 |
F9 error on Avanti oven, door may remain locked after self-clean or will not lock when starting self-clean.
|
Oven Door Lock Failure or Door Lock Circuit Error. | View Details |
| LOC |
Control panel displays LOC or a lock icon on Avanti range; oven and sometimes cooktop controls do not respond.
|
Control Panel Child Lock / Control Lock Activated. | View Details |
| PF |
PF or power failure message on Avanti range display, clock resets, oven cancels cooking cycle.
|
Power Failure or Voltage Interruption Detected by Control. | View Details |
| – |
Clock and display are blank on Avanti range, but surface elements may still work (on some models).
|
Control Power Loss or Failed Display Board | View Details |
| – |
Control knobs on an Avanti range are hard to turn or feel loose.
|
Worn or Contaminated Control Knobs / Valve Stems | View Details |
| – |
Cooktop electric elements on an Avanti range cycle on and off rapidly or do not maintain low heat
|
Surface Element Temperature Control Issue | View Details |
| – |
Cooktop gas burners click but do not light or take a long time to light on Avanti gas range
|
Delayed or Failed Surface Burner Ignition | View Details |
| – |
Cooktop gas burners will not ignite; no clicking sound on Avanti gas range
|
Surface Burner Ignition System Failure | View Details |
| – |
Electric oven heats but takes excessively long to reach temperature on Avanti range
|
Partial Oven Heating or Weak Element | View Details |
| – |
Electric oven will not heat on Avanti electric range; display and lights work, but no bake or broil.
|
Oven Heating Circuit Failure | View Details |
| – |
Excessive smoke from the oven during use on an Avanti range.
|
Burn-off of Spills or Contaminants | View Details |
| – |
Gas oven lights, but temperature is inaccurate or fluctuates widely on Avanti gas range.
|
Oven Temperature Regulation Problem | View Details |
| – |
Gas oven will not ignite, no heat, but cooktop burners work on Avanti gas range.
|
Oven Ignition Failure | View Details |
| – |
One electric cooktop element on an Avanti range does not heat; others work normally
|
Single Surface Element Failure | View Details |
| – |
Oven door will not close fully or does not seal on an Avanti range
|
Oven Door Alignment or Hinge Failure | View Details |
| – |
Oven door will not open after a self-clean cycle on an Avanti range (no F-code displayed)
|
Stuck Oven Door Lock Mechanism | View Details |
| – |
Oven light does not work on an Avanti range, but the oven heats normally
|
Oven Cavity Lighting Failure | View Details |
| – |
Oven or cooktop flames are yellow and produce soot on an Avanti gas range
|
Improper Gas-Air Mixture / Incomplete Combustion | View Details |
| – |
Range leveling is off; oven racks are not level, and liquids bake unevenly in an Avanti range.
|
Improper Range Leveling / Installation | View Details |
| – |
Range trips breaker when the oven or cooktop is turned on (Avanti electric range).
|
Electrical Short or Overcurrent | View Details |
| – |
Strong gas smell around an Avanti gas range when burners or the oven are in use
|
Gas Leak or Incomplete Combustion | View Details |
| – |
The cooktop glass is cracked or shattered on an Avanti electric or induction cooktop.
|
Damaged Ceramic Glass Top | View Details |
| – |
The oven makes loud popping or banging noises during heating or cooling on an Avanti range.
|
Thermal Expansion Noise or Loose Components | View Details |
| – |
The oven temperature display does not match the actual temperature on an Avanti electronic range (but the oven otherwise heats).
|
Oven Temperature Calibration Offset | View Details |
No matching codes found
Advertisements