F25
Crosley
Drive Motor Tachometer Error
Washer displays F25; may have issues with spin speed or unbalanced loads.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose tachometer connector at motor, damaged tach coil, broken motor shaft magnet, wiring harness fault
How to Fix / Troubleshooting
Safety first: Unplug the washer before accessing the motor.
Inspect tachometer assembly:
- Remove the rear panel and locate the drive motor.
- Identify the tachometer connector (often a small two-wire plug on the motor). Ensure it is fully seated and wires are intact.
- Remove the motor if necessary and inspect the tach ring or magnet on the shaft for cracks or dislodging.
- Measure tach coil resistance with a multimeter (check tech sheet for spec). Replace the motor if the tach coil is open or shorted.
Reassemble and test: After securing all connections, run a spin-only cycle with an empty drum to verify that F25 does not reappear.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Drive Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements