Crosley Washing Machines Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
The washer will not start a cycle; the control panel has power, but the Start button does nothing or the cycle cancels immediately.
Main Control Board Failure
F02
The washer stops mid-cycle and will not drain; it may display F02 or "Sd"; water remains in the drum.
Long Drain Fault
F05
The washer will not advance, may stop with water in the tub and display F05; sometimes accompanied by the door not unlocking.
Water Temperature Sensor (NTC) Fault
F06
The washer will not spin or tumble; F06 is displayed; the drum may move slightly then stop.
Motor Tachometer or Drive Motor Fault
F07
The washer stops heating water or aborts the cycle with F07; clothes may come out cold on hot cycles.
Heater Relay or Heating Circuit Fault
F08
Washer fills and drains repeatedly or will not advance; F08 is displayed; may also show water level issues.
Water Level Pressure Switch Fault
F09
Washer displays F09 and stops; may be associated with overfilling or continuous filling and draining.
Overflow Condition
F11
Washer stops mid-cycle with F11; may intermittently work then fail again; communication-related error.
Serial Communication Error
F13
Washer will not lock or unlock the door; F13 is displayed; cycle will not start or complete.
Door Lock Circuit Fault
F21
Washer displays F21 and will not drain or complete the cycle; water may remain in the tub for a long time.
Long Drain Time-Out
F22
Washer will not start; F22 is displayed; the door appears closed but the machine thinks it is open.
Door Lock Failure to Lock
F23
Washer displays F23 and may stop heating or abort the cycle; often related to temperature sensing.
Heater Temperature Sensor Error
F24
Washer shows F24 and may not start or may stop during wash; temperature-related fault.
Water Temperature Out of Range
F25
Washer displays F25; may have issues with spin speed or unbalanced loads.
Drive Motor Tachometer Error
F26
Washer may not start or may stop unexpectedly; F26 is displayed; door status is not detected correctly.
Door Switch Input Error
F28
Washer displays F28; it may not respond to control inputs or may freeze mid-cycle.
Communication Error Between Central Control and Motor Control
F29
The washer door will not unlock at the end of a cycle; F29 is displayed.
Door Unlock Failure
F30
The washer displays F30; it may have issues with dispenser operation or water routing.
Dispenser System Error
F31
The washer displays F31; it may not spin properly or may stop with an unbalanced load indication.
Motor Control or Speed Sensing Error
F33
The washer displays F33; it may have issues with water level or pressure sensing.
Pump Drive or Pressure Sensor Error
F34
The washer will not lock its door; F34 is displayed, and the cycle cannot start.
Door Locking Failure
F35
The washer displays F35; it may also show 'Sud/Sd' and have issues with water level and suds detection.
Analog Pressure Sensor Error
F40
The washer will not start; F40 is displayed, indicating a line voltage or power-related error.
Line Voltage Error
F70
The washer displays F70; it may be unresponsive or freeze during operation.
Central Control Unit (CCU) Heartbeat Failure
F71
The washer displays F71; it may not respond to user interface inputs correctly.
User Interface / CCU Mismatch or Communication Error
Sd
Washer displays "Sd" or "Sud"; excessive suds; the cycle may pause while the machine attempts to clear foam.
Excessive Suds Detected
UE
Washer stops before or during spin; displays UE or "unbalanced"; the drum may rock violently.
Unbalanced Load Detection
Symptom
A top-load Crosley washer fills but will not agitate; the motor hums or makes no sound.
Agitation Failure
Symptom
The washer does not fill with water or fills very slowly; no error code is displayed.
Slow or No Fill
Symptom
The washer leaks water from the front or bottom during wash or spin.
Water Leak
Symptom
The washer makes a high-pitched squeal or grinding noise during spin.
Bearing or Pulley Wear
Symptom
The washer makes loud banging or knocking noises during spin.
Excessive Vibration / Suspension Failure
Symptom
The washer overfills or continues to fill with water even when unplugged.
Overfilling / Flooding
Symptom
The washer will not power on at all; no lights or display, but the outlet has power.
No Power / Dead Control
Symptom
The washer will not spin but will drain water; clothes remain very wet at the end of the cycle.
Spin Cycle Failure
Symptom
Top-load washer agitates but does not spin; water drains out.
Spin Clutch or Drive Hub Failure
Symptom
Washer display and buttons work, but the Start button does not begin the cycle.
User Interface or Start Circuit Fault
Symptom
Washer emits a burning rubber smell during operation.
Drive System Overheating
Symptom
Washer has a strong musty or moldy odor, especially in front-load models.
Biofilm and Mold Buildup
Symptom
Washer leaves clothes with detergent residue or not fully rinsed.
Poor Rinsing Performance
Symptom
Washer stops mid-cycle and will not resume; lights may be on but no action.
Cycle Interruption / Control Hang
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
The washer will not start a cycle; the control panel has power, but the Start button does nothing or the cycle cancels immediately.
|
Main Control Board Failure | View Details |
| F02 |
The washer stops mid-cycle and will not drain; it may display F02 or "Sd"; water remains in the drum.
|
Long Drain Fault | View Details |
| F05 |
The washer will not advance, may stop with water in the tub and display F05; sometimes accompanied by the door not unlocking.
|
Water Temperature Sensor (NTC) Fault | View Details |
| F06 |
The washer will not spin or tumble; F06 is displayed; the drum may move slightly then stop.
|
Motor Tachometer or Drive Motor Fault | View Details |
| F07 |
The washer stops heating water or aborts the cycle with F07; clothes may come out cold on hot cycles.
|
Heater Relay or Heating Circuit Fault | View Details |
| F08 |
Washer fills and drains repeatedly or will not advance; F08 is displayed; may also show water level issues.
|
Water Level Pressure Switch Fault | View Details |
| F09 |
Washer displays F09 and stops; may be associated with overfilling or continuous filling and draining.
|
Overflow Condition | View Details |
| F11 |
Washer stops mid-cycle with F11; may intermittently work then fail again; communication-related error.
|
Serial Communication Error | View Details |
| F13 |
Washer will not lock or unlock the door; F13 is displayed; cycle will not start or complete.
|
Door Lock Circuit Fault | View Details |
| F21 |
Washer displays F21 and will not drain or complete the cycle; water may remain in the tub for a long time.
|
Long Drain Time-Out | View Details |
| F22 |
Washer will not start; F22 is displayed; the door appears closed but the machine thinks it is open.
|
Door Lock Failure to Lock | View Details |
| F23 |
Washer displays F23 and may stop heating or abort the cycle; often related to temperature sensing.
|
Heater Temperature Sensor Error | View Details |
| F24 |
Washer shows F24 and may not start or may stop during wash; temperature-related fault.
|
Water Temperature Out of Range | View Details |
| F25 |
Washer displays F25; may have issues with spin speed or unbalanced loads.
|
Drive Motor Tachometer Error | View Details |
| F26 |
Washer may not start or may stop unexpectedly; F26 is displayed; door status is not detected correctly.
|
Door Switch Input Error | View Details |
| F28 |
Washer displays F28; it may not respond to control inputs or may freeze mid-cycle.
|
Communication Error Between Central Control and Motor Control | View Details |
| F29 |
The washer door will not unlock at the end of a cycle; F29 is displayed.
|
Door Unlock Failure | View Details |
| F30 |
The washer displays F30; it may have issues with dispenser operation or water routing.
|
Dispenser System Error | View Details |
| F31 |
The washer displays F31; it may not spin properly or may stop with an unbalanced load indication.
|
Motor Control or Speed Sensing Error | View Details |
| F33 |
The washer displays F33; it may have issues with water level or pressure sensing.
|
Pump Drive or Pressure Sensor Error | View Details |
| F34 |
The washer will not lock its door; F34 is displayed, and the cycle cannot start.
|
Door Locking Failure | View Details |
| F35 |
The washer displays F35; it may also show 'Sud/Sd' and have issues with water level and suds detection.
|
Analog Pressure Sensor Error | View Details |
| F40 |
The washer will not start; F40 is displayed, indicating a line voltage or power-related error.
|
Line Voltage Error | View Details |
| F70 |
The washer displays F70; it may be unresponsive or freeze during operation.
|
Central Control Unit (CCU) Heartbeat Failure | View Details |
| F71 |
The washer displays F71; it may not respond to user interface inputs correctly.
|
User Interface / CCU Mismatch or Communication Error | View Details |
| Sd |
Washer displays "Sd" or "Sud"; excessive suds; the cycle may pause while the machine attempts to clear foam.
|
Excessive Suds Detected | View Details |
| UE |
Washer stops before or during spin; displays UE or "unbalanced"; the drum may rock violently.
|
Unbalanced Load Detection | View Details |
| – |
A top-load Crosley washer fills but will not agitate; the motor hums or makes no sound.
|
Agitation Failure | View Details |
| – |
The washer does not fill with water or fills very slowly; no error code is displayed.
|
Slow or No Fill | View Details |
| – |
The washer leaks water from the front or bottom during wash or spin.
|
Water Leak | View Details |
| – |
The washer makes a high-pitched squeal or grinding noise during spin.
|
Bearing or Pulley Wear | View Details |
| – |
The washer makes loud banging or knocking noises during spin.
|
Excessive Vibration / Suspension Failure | View Details |
| – |
The washer overfills or continues to fill with water even when unplugged.
|
Overfilling / Flooding | View Details |
| – |
The washer will not power on at all; no lights or display, but the outlet has power.
|
No Power / Dead Control | View Details |
| – |
The washer will not spin but will drain water; clothes remain very wet at the end of the cycle.
|
Spin Cycle Failure | View Details |
| – |
Top-load washer agitates but does not spin; water drains out.
|
Spin Clutch or Drive Hub Failure | View Details |
| – |
Washer display and buttons work, but the Start button does not begin the cycle.
|
User Interface or Start Circuit Fault | View Details |
| – |
Washer emits a burning rubber smell during operation.
|
Drive System Overheating | View Details |
| – |
Washer has a strong musty or moldy odor, especially in front-load models.
|
Biofilm and Mold Buildup | View Details |
| – |
Washer leaves clothes with detergent residue or not fully rinsed.
|
Poor Rinsing Performance | View Details |
| – |
Washer stops mid-cycle and will not resume; lights may be on but no action.
|
Cycle Interruption / Control Hang | View Details |
No matching codes found
Advertisements