Balay Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
The dryer will not start; the display shows E01 and the door symbol may flash.
Door Lock / Door Switch Fault
E02
The dryer stops shortly after starting or will not start; E02 is displayed.
Moisture Sensor / Humidity Detection Fault
E03
Dryer does not heat or stops with E03 displayed.
Heating Circuit Fault (Heater / NTC / Thermal Cut-out)
E04
Dryer stops mid-cycle with E04 displayed; poor or no water collection in the condenser tank.
Condensate Pump / Drain System Fault
E05
Dryer stops or will not start; E05 is displayed, often related to overheating or airflow issues.
Airflow / Overtemperature Protection Fault
E06
Dryer does not heat correctly or stops with E06 displayed; may show erratic temperature behaviour.
NTC Temperature Sensor Fault (Drum / Exhaust)
E07
Dryer drum does not rotate; E07 is displayed shortly after start.
Drive Motor / Belt / Motor Control Fault
E08
Dryer stops with E08 displayed; often associated with fan or airflow motor issues.
Blower Fan / Fan Motor Fault
E09
Heat pump dryer does not heat; E09 is displayed.
Heat Pump Compressor / Inverter Fault
E10
Dryer shows E10 and may not start or may stop unexpectedly; often linked to communication issues.
Control Module Communication / Internal Electronics Fault
E11
Dryer displays E11; may be associated with door locking/unlocking anomalies.
Door Lock Feedback / Door Unlock Fault
E12
Dryer shows E12; often related to sensor system or program logic errors.
Program Logic / Sensor System General Fault
E13
Dryer displays E13; may be associated with excessive moisture in the base or leak detection.
Leak / Water Level Sensor Fault (Condenser / Heat Pump Models)
E14
Dryer displays E14; often associated with humidity or ambient temperature sensor issues on some models.
Ambient / Additional Temperature Sensor Fault
E15
Dryer displays E15; may be related to power supply or internal voltage monitoring.
Internal Power Supply / Overvoltage-Undervoltage Fault
E16
Dryer displays E16; may be associated with door open detection during a cycle.
Door Open Detection Fault
E17
Dryer displays E17; may be related to drum speed sensing or the motor tachometer.
Motor Tachometer / Speed Sensor Fault
E18
Dryer displays E18; may be associated with a blocked condenser or airflow sensor on some models.
Condenser Airflow / Pressure Sensor Fault
E19
Dryer displays E19; may be related to water tank level detection.
Water Tank Full Sensor / Level Switch Fault
E20
Dryer displays E20; may be associated with an internal memory or configuration error.
Configuration / EEPROM Fault
Symptom
Dryer control panel buttons are unresponsive or intermittent.
User Interface / Keypad Fault
Symptom
Dryer display and lights work, but the drum and motor do not run.
Motor Start / Drive Circuit Fault
Symptom
Dryer display is dim, flickering, or partially unreadable.
Display Module / Backlight Fault
Symptom
Dryer does not start at all; no lights or display.
No Power / Dead Appliance
Symptom
Dryer door seal is damaged, or clothes get caught at the door opening.
Door Gasket / Drum Front Seal Fault
Symptom
Dryer door will not stay closed or pops open during the cycle.
Door Latch / Catch Fault
Symptom
Dryer drum does not turn, but the motor can be heard humming.
Drive Belt / Drum Support Fault
Symptom
Dryer emits a burning smell during operation.
Overheating / Foreign Object on Heater
Symptom
Dryer has a musty or mouldy smell inside the drum and on clothes.
Odour / Microbial Growth in Condenser and Air Ducts
Symptom
Dryer leaks water onto the floor during or after operation.
Water Leak / Condensate Handling Fault
Symptom
Dryer makes loud banging or thumping noises during operation.
Drum Support / Suspension Fault
Symptom
Dryer occasionally trips the household circuit breaker or RCD.
Electrical Leakage / Short Circuit
Symptom
Dryer powers on but will not start when the Start button is pressed.
Start Circuit / User Interface Fault
Symptom
Dryer produces a high-pitched squealing or squeaking noise.
Friction in Drum Support or Idler Pulley
Symptom
Dryer runs but clothes remain wet or only slightly warm at the end of the cycle.
No Heat / Insufficient Heating
Symptom
Dryer runs but takes much longer than usual to dry clothes.
Reduced Drying Efficiency / Restricted Airflow
Symptom
Dryer runs, but there is no drum light (on models with an internal light).
Drum Light Circuit Fault
Symptom
Dryer stops mid-cycle and will not resume until it has cooled down.
Thermal Overload / Overheating Protection
Symptom
Dryer stops with the water tank full indicator, even when the tank is empty.
False Water Tank Full Indication
Symptom
Dryer vibrates excessively or moves across the floor during operation.
Imbalance / Mechanical Vibration Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
The dryer will not start; the display shows E01 and the door symbol may flash.
|
Door Lock / Door Switch Fault | View Details |
| E02 |
The dryer stops shortly after starting or will not start; E02 is displayed.
|
Moisture Sensor / Humidity Detection Fault | View Details |
| E03 |
Dryer does not heat or stops with E03 displayed.
|
Heating Circuit Fault (Heater / NTC / Thermal Cut-out) | View Details |
| E04 |
Dryer stops mid-cycle with E04 displayed; poor or no water collection in the condenser tank.
|
Condensate Pump / Drain System Fault | View Details |
| E05 |
Dryer stops or will not start; E05 is displayed, often related to overheating or airflow issues.
|
Airflow / Overtemperature Protection Fault | View Details |
| E06 |
Dryer does not heat correctly or stops with E06 displayed; may show erratic temperature behaviour.
|
NTC Temperature Sensor Fault (Drum / Exhaust) | View Details |
| E07 |
Dryer drum does not rotate; E07 is displayed shortly after start.
|
Drive Motor / Belt / Motor Control Fault | View Details |
| E08 |
Dryer stops with E08 displayed; often associated with fan or airflow motor issues.
|
Blower Fan / Fan Motor Fault | View Details |
| E09 |
Heat pump dryer does not heat; E09 is displayed.
|
Heat Pump Compressor / Inverter Fault | View Details |
| E10 |
Dryer shows E10 and may not start or may stop unexpectedly; often linked to communication issues.
|
Control Module Communication / Internal Electronics Fault | View Details |
| E11 |
Dryer displays E11; may be associated with door locking/unlocking anomalies.
|
Door Lock Feedback / Door Unlock Fault | View Details |
| E12 |
Dryer shows E12; often related to sensor system or program logic errors.
|
Program Logic / Sensor System General Fault | View Details |
| E13 |
Dryer displays E13; may be associated with excessive moisture in the base or leak detection.
|
Leak / Water Level Sensor Fault (Condenser / Heat Pump Models) | View Details |
| E14 |
Dryer displays E14; often associated with humidity or ambient temperature sensor issues on some models.
|
Ambient / Additional Temperature Sensor Fault | View Details |
| E15 |
Dryer displays E15; may be related to power supply or internal voltage monitoring.
|
Internal Power Supply / Overvoltage-Undervoltage Fault | View Details |
| E16 |
Dryer displays E16; may be associated with door open detection during a cycle.
|
Door Open Detection Fault | View Details |
| E17 |
Dryer displays E17; may be related to drum speed sensing or the motor tachometer.
|
Motor Tachometer / Speed Sensor Fault | View Details |
| E18 |
Dryer displays E18; may be associated with a blocked condenser or airflow sensor on some models.
|
Condenser Airflow / Pressure Sensor Fault | View Details |
| E19 |
Dryer displays E19; may be related to water tank level detection.
|
Water Tank Full Sensor / Level Switch Fault | View Details |
| E20 |
Dryer displays E20; may be associated with an internal memory or configuration error.
|
Configuration / EEPROM Fault | View Details |
| – |
Dryer control panel buttons are unresponsive or intermittent.
|
User Interface / Keypad Fault | View Details |
| – |
Dryer display and lights work, but the drum and motor do not run.
|
Motor Start / Drive Circuit Fault | View Details |
| – |
Dryer display is dim, flickering, or partially unreadable.
|
Display Module / Backlight Fault | View Details |
| – |
Dryer does not start at all; no lights or display.
|
No Power / Dead Appliance | View Details |
| – |
Dryer door seal is damaged, or clothes get caught at the door opening.
|
Door Gasket / Drum Front Seal Fault | View Details |
| – |
Dryer door will not stay closed or pops open during the cycle.
|
Door Latch / Catch Fault | View Details |
| – |
Dryer drum does not turn, but the motor can be heard humming.
|
Drive Belt / Drum Support Fault | View Details |
| – |
Dryer emits a burning smell during operation.
|
Overheating / Foreign Object on Heater | View Details |
| – |
Dryer has a musty or mouldy smell inside the drum and on clothes.
|
Odour / Microbial Growth in Condenser and Air Ducts | View Details |
| – |
Dryer leaks water onto the floor during or after operation.
|
Water Leak / Condensate Handling Fault | View Details |
| – |
Dryer makes loud banging or thumping noises during operation.
|
Drum Support / Suspension Fault | View Details |
| – |
Dryer occasionally trips the household circuit breaker or RCD.
|
Electrical Leakage / Short Circuit | View Details |
| – |
Dryer powers on but will not start when the Start button is pressed.
|
Start Circuit / User Interface Fault | View Details |
| – |
Dryer produces a high-pitched squealing or squeaking noise.
|
Friction in Drum Support or Idler Pulley | View Details |
| – |
Dryer runs but clothes remain wet or only slightly warm at the end of the cycle.
|
No Heat / Insufficient Heating | View Details |
| – |
Dryer runs but takes much longer than usual to dry clothes.
|
Reduced Drying Efficiency / Restricted Airflow | View Details |
| – |
Dryer runs, but there is no drum light (on models with an internal light).
|
Drum Light Circuit Fault | View Details |
| – |
Dryer stops mid-cycle and will not resume until it has cooled down.
|
Thermal Overload / Overheating Protection | View Details |
| – |
Dryer stops with the water tank full indicator, even when the tank is empty.
|
False Water Tank Full Indication | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation.
|
Imbalance / Mechanical Vibration Fault | View Details |
No matching codes found
Advertisements