Fagor Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
The oven does not heat in any mode; the display and lights work normally.
Main Oven Heating Circuit Failure
F02
The oven overheats; the temperature is far above the set point, and food burns quickly.
Temperature Regulation Failure
F03
Oven does not reach set temperature, takes a very long time to heat, or undercooks food.
Insufficient Heating / Temperature Sensor Calibration Fault
F04
Oven display shows a sensor error, and the oven will not start heating.
Oven Temperature Sensor Open/Short Circuit
F05
The oven fan does not run in fan-assisted or convection modes, leading to poor heat distribution.
Convection Fan Motor Failure
F06
The cooling fan at the top of the oven does not run, the control panel becomes very hot, and the oven may shut down.
Cooling Fan Circuit Failure
F07
The oven display is dead or flickers, but the interior light may still work.
Low Voltage Power Supply Failure
F08
The oven display works, but the buttons or touch controls do not respond.
User Interface / Keypad Failure
F09
The oven door remains locked after a cooking cycle, even when cool.
Door Lock Mechanism Fault
F10
The oven will not start, and the display shows a door error or a flashing lock symbol.
Door Switch / Lock Detection Failure
F11
The grill function does not heat, while other oven functions work correctly.
Grill Heating Circuit Failure
F12
The bottom heat function does not work, while the top and fan heat functions are operating correctly.
Lower Heating Element Failure
F13
Oven light does not work; all heating functions are normal.
Oven Cavity Lamp Circuit Failure
F14
Pyrolytic self-clean cycle will not start; an error is displayed.
Pyrolytic Lock / Temperature Protection Fault
F15
The clock cannot be set; the oven will not operate because the time is not configured.
Clock / Timer Module Failure
F16
An error code appears when using the meat probe or temperature probe function.
Food Probe Sensor Fault
F17
The display shows the child lock symbol, and controls cannot be used.
Child Lock / Control Lock Activated or Faulty
F18
An error appears when switching functions; the oven stops heating unexpectedly.
Function Selector / Mode Switch Fault
F19
The oven trips the household circuit breaker or RCD when heating starts.
Earth Leakage / Short Circuit in Heating Circuit
F20
The display shows a generic fault; the oven beeps and stops, with no specific function indicated.
General Control System Error
Symptom
Control panel buttons are sticky or hard to press, some functions intermittent
Contaminated or Worn Keypad
Symptom
High-pitched squealing or grinding noise from oven fan
Fan Motor Bearing Wear
Symptom
Mechanical timer or analog clock not advancing or stuck
Mechanical Timer Failure
Symptom
Oven cavity shows rust spots, flaking enamel, or bubbling paint
Cavity Enamel Degradation
Symptom
Oven display works but oven will not start heating when a function is selected
Control Logic or Safety Interlock Inhibition
Symptom
Oven door does not close properly, heat escapes around edges
Door Alignment / Hinge Wear
Symptom
Oven door glass is loose, rattles, or has condensation between panes
Door Glass Assembly Deterioration
Symptom
Oven emits burning smell or smoke during normal cooking (not first use or cleaning)
Overheating or Contamination on Heating Elements
Symptom
Oven enamel discolors or turns brown near door seal area
Localized Overheating at Door Perimeter
Symptom
Oven fan continues running for a very long time after oven is turned off
Cooling Fan Overrun or Thermostat Stuck
Symptom
Oven interior light flickers during operation
Intermittent Lamp or Connection
Symptom
Oven interior light stays on all the time, even when door is closed and oven is off
Stuck Light Switch or Relay
Symptom
Oven light does not turn on when door is opened, but works when manually switched on (if feature exists)
Door-Activated Light Function Failure
Symptom
Oven makes loud banging or rattling noise when fan is running
Fan Imbalance or Loose Components
Symptom
Oven trips RCD or GFCI when door is opened or closed
Door-Related Earth Leakage or Short
Symptom
Steam or moisture condenses on control panel and drips from door
Condensation Management / Ventilation Issue
Symptom
Strong electrical or plastic smell from control panel area
Overheating Control Electronics or Wiring
Symptom
The oven heats, but the temperature is inaccurate compared to the setting; no error code is displayed.
Temperature Calibration Drift
Symptom
The oven is not heating at all; no error code is displayed.
Supply or Safety Cut-Out Interruption
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
The oven does not heat in any mode; the display and lights work normally.
|
Main Oven Heating Circuit Failure | View Details |
| F02 |
The oven overheats; the temperature is far above the set point, and food burns quickly.
|
Temperature Regulation Failure | View Details |
| F03 |
Oven does not reach set temperature, takes a very long time to heat, or undercooks food.
|
Insufficient Heating / Temperature Sensor Calibration Fault | View Details |
| F04 |
Oven display shows a sensor error, and the oven will not start heating.
|
Oven Temperature Sensor Open/Short Circuit | View Details |
| F05 |
The oven fan does not run in fan-assisted or convection modes, leading to poor heat distribution.
|
Convection Fan Motor Failure | View Details |
| F06 |
The cooling fan at the top of the oven does not run, the control panel becomes very hot, and the oven may shut down.
|
Cooling Fan Circuit Failure | View Details |
| F07 |
The oven display is dead or flickers, but the interior light may still work.
|
Low Voltage Power Supply Failure | View Details |
| F08 |
The oven display works, but the buttons or touch controls do not respond.
|
User Interface / Keypad Failure | View Details |
| F09 |
The oven door remains locked after a cooking cycle, even when cool.
|
Door Lock Mechanism Fault | View Details |
| F10 |
The oven will not start, and the display shows a door error or a flashing lock symbol.
|
Door Switch / Lock Detection Failure | View Details |
| F11 |
The grill function does not heat, while other oven functions work correctly.
|
Grill Heating Circuit Failure | View Details |
| F12 |
The bottom heat function does not work, while the top and fan heat functions are operating correctly.
|
Lower Heating Element Failure | View Details |
| F13 |
Oven light does not work; all heating functions are normal.
|
Oven Cavity Lamp Circuit Failure | View Details |
| F14 |
Pyrolytic self-clean cycle will not start; an error is displayed.
|
Pyrolytic Lock / Temperature Protection Fault | View Details |
| F15 |
The clock cannot be set; the oven will not operate because the time is not configured.
|
Clock / Timer Module Failure | View Details |
| F16 |
An error code appears when using the meat probe or temperature probe function.
|
Food Probe Sensor Fault | View Details |
| F17 |
The display shows the child lock symbol, and controls cannot be used.
|
Child Lock / Control Lock Activated or Faulty | View Details |
| F18 |
An error appears when switching functions; the oven stops heating unexpectedly.
|
Function Selector / Mode Switch Fault | View Details |
| F19 |
The oven trips the household circuit breaker or RCD when heating starts.
|
Earth Leakage / Short Circuit in Heating Circuit | View Details |
| F20 |
The display shows a generic fault; the oven beeps and stops, with no specific function indicated.
|
General Control System Error | View Details |
| – |
Control panel buttons are sticky or hard to press, some functions intermittent
|
Contaminated or Worn Keypad | View Details |
| – |
High-pitched squealing or grinding noise from oven fan
|
Fan Motor Bearing Wear | View Details |
| – |
Mechanical timer or analog clock not advancing or stuck
|
Mechanical Timer Failure | View Details |
| – |
Oven cavity shows rust spots, flaking enamel, or bubbling paint
|
Cavity Enamel Degradation | View Details |
| – |
Oven display works but oven will not start heating when a function is selected
|
Control Logic or Safety Interlock Inhibition | View Details |
| – |
Oven door does not close properly, heat escapes around edges
|
Door Alignment / Hinge Wear | View Details |
| – |
Oven door glass is loose, rattles, or has condensation between panes
|
Door Glass Assembly Deterioration | View Details |
| – |
Oven emits burning smell or smoke during normal cooking (not first use or cleaning)
|
Overheating or Contamination on Heating Elements | View Details |
| – |
Oven enamel discolors or turns brown near door seal area
|
Localized Overheating at Door Perimeter | View Details |
| – |
Oven fan continues running for a very long time after oven is turned off
|
Cooling Fan Overrun or Thermostat Stuck | View Details |
| – |
Oven interior light flickers during operation
|
Intermittent Lamp or Connection | View Details |
| – |
Oven interior light stays on all the time, even when door is closed and oven is off
|
Stuck Light Switch or Relay | View Details |
| – |
Oven light does not turn on when door is opened, but works when manually switched on (if feature exists)
|
Door-Activated Light Function Failure | View Details |
| – |
Oven makes loud banging or rattling noise when fan is running
|
Fan Imbalance or Loose Components | View Details |
| – |
Oven trips RCD or GFCI when door is opened or closed
|
Door-Related Earth Leakage or Short | View Details |
| – |
Steam or moisture condenses on control panel and drips from door
|
Condensation Management / Ventilation Issue | View Details |
| – |
Strong electrical or plastic smell from control panel area
|
Overheating Control Electronics or Wiring | View Details |
| – |
The oven heats, but the temperature is inaccurate compared to the setting; no error code is displayed.
|
Temperature Calibration Drift | View Details |
| – |
The oven is not heating at all; no error code is displayed.
|
Supply or Safety Cut-Out Interruption | View Details |
No matching codes found
Advertisements