New World Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
The oven will not heat, and the display shows F01 shortly after a cooking program is selected.
Main Oven Temperature Sensor Circuit Fault
F02
The oven overheats, may burn food quickly, and displays F02 or shuts down mid-cycle.
Oven Overtemperature / Sensor Range Error
F03
The fan oven is not heating; the fan runs but produces no heat, and F03 is displayed.
Fan Oven Heating Element Circuit Fault
F04
The grill does not heat or cuts out, and F04 is shown on the display when the grill is selected.
Grill Element / Grill Circuit Fault
F05
The main oven is not heating in conventional (top/bottom) mode, but fan mode may still work. F05 is displayed.
Conventional Oven Element Fault
F06
The display shows F06, and the oven controls are unresponsive or erratic.
User Interface / Keypad Communication Fault
F07
The oven display shows F07, and the oven will not start heating.
Door Lock / Door Switch Fault (Pyro or Safety Interlock)
F08
The oven cuts out during use and displays F08, often after running for some time.
Overheat Safety Thermostat / Thermal Cut-Out Tripped
F09
The clock/timer flashes F09 and oven functions are disabled.
Clock / Timer Module Fault
F10
The top oven (in double oven models) is not heating, and F10 is displayed when the top oven is selected.
Top Oven Temperature Sensor Fault
F11
The fan runs continuously or not at all, with an F11 error on the display.
Cooling Fan Control Fault
F12
The display shows F12 and the oven beeps, often after a power cut or surge.
EEPROM / Configuration Data Error
F13
The oven display shows F13, and the interior light and fan may not operate.
Low Voltage / Power Supply Fault
F14
The pyrolytic self-clean cycle will not start, and F14 is displayed.
Pyrolytic System Fault
F15
The oven light and fan work, but there is no heat, and F15 is displayed intermittently.
Relay Stuck / Heater Drive Fault
F16
The display shows F16, and the oven fan runs, but the temperature cannot be set correctly.
Temperature Calibration / Sensor Range Fault
F17
The oven display shows F17 and beeps continuously; no functions can be selected.
Stuck Key / Touch Panel Fault
F18
Oven shows F18 and may shut down unexpectedly during use.
Internal Temperature / Heat Sink Overheat Fault
Symptom
Condensation forms heavily on the oven door and drips onto the floor during cooking.
Excess Condensation / Steam Management Issue
Symptom
Control knobs become very stiff or difficult to turn.
Knob / Shaft Binding
Symptom
Oven cabinet sides and control panel become excessively hot during normal cooking.
Cooling / Ventilation Deficiency
Symptom
Oven clock/timer display is blank, but the oven may still heat using manual controls.
Clock / Display Power Loss
Symptom
Oven does not heat at all, no error code, fan and light may or may not work.
No Heat Condition – General Power or Heating Circuit Failure
Symptom
Oven door glass has become loose or rattles when opening/closing.
Door Glass Mounting / Bracket Failure
Symptom
Oven door seal is damaged, or heat escapes around the door, causing surrounding cabinets to overheat.
Door Gasket / Seal Failure
Symptom
Oven door will not close fully, leaving a gap and causing heat loss.
Door Hinge / Hinge Receiver Wear
Symptom
Oven door will not open after use (non-pyrolytic model), feels jammed.
Mechanical Door Latch Jam
Symptom
Oven enamel is flaking, or rust spots appear inside the cavity.
Cavity Enamel Degradation
Symptom
Oven fan runs loudly, with a grinding or rattling noise during operation.
Fan Bearing Wear / Fan Blade Damage
Symptom
Oven heats but takes a very long time to reach temperature or never gets fully hot.
Partial Heating / Weak Heating
Symptom
Oven interior light does not work, but the oven heats normally.
Oven Lamp Failure
Symptom
Oven light works but the fan does not run in fan oven mode.
Oven Circulation Fan Failure
Symptom
Oven overheats and burns food even at low settings, no error code.
Thermostat Stuck Closed / Sensor Misreading
Symptom
Oven trips the circuit breaker or RCD when turned on or when a specific function is selected.
Electrical Short or Earth Leakage
Symptom
The grill in the top oven works only on one side or heats unevenly.
Dual Grill Element Partial Failure
Symptom
The oven cavity light and fan come on as soon as power is applied, even with the controls off.
Stuck Relay or Shorted Selector Contacts
Symptom
The oven emits a strong burning smell or smoke during use.
Contamination / Residue Burning
Symptom
The oven makes a metallic clicking or popping noise as it heats and cools.
Thermal Expansion Noise
Symptom
The oven temperature is inaccurate compared to the set temperature (too hot or too cold) without showing an error.
Temperature Calibration Drift
Symptom
The oven will not start unless the clock is set, and the user cannot figure out how to set it.
Clock Not Set / Auto Mode Engaged
Symptom
The timer alarm is very quiet or does not sound at all.
Buzzer / Sounder Failure
Symptom
The top oven in a double oven unit does not heat, but the bottom oven works normally (no error code).
Secondary (Top) Oven Heating Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
The oven will not heat, and the display shows F01 shortly after a cooking program is selected.
|
Main Oven Temperature Sensor Circuit Fault | View Details |
| F02 |
The oven overheats, may burn food quickly, and displays F02 or shuts down mid-cycle.
|
Oven Overtemperature / Sensor Range Error | View Details |
| F03 |
The fan oven is not heating; the fan runs but produces no heat, and F03 is displayed.
|
Fan Oven Heating Element Circuit Fault | View Details |
| F04 |
The grill does not heat or cuts out, and F04 is shown on the display when the grill is selected.
|
Grill Element / Grill Circuit Fault | View Details |
| F05 |
The main oven is not heating in conventional (top/bottom) mode, but fan mode may still work. F05 is displayed.
|
Conventional Oven Element Fault | View Details |
| F06 |
The display shows F06, and the oven controls are unresponsive or erratic.
|
User Interface / Keypad Communication Fault | View Details |
| F07 |
The oven display shows F07, and the oven will not start heating.
|
Door Lock / Door Switch Fault (Pyro or Safety Interlock) | View Details |
| F08 |
The oven cuts out during use and displays F08, often after running for some time.
|
Overheat Safety Thermostat / Thermal Cut-Out Tripped | View Details |
| F09 |
The clock/timer flashes F09 and oven functions are disabled.
|
Clock / Timer Module Fault | View Details |
| F10 |
The top oven (in double oven models) is not heating, and F10 is displayed when the top oven is selected.
|
Top Oven Temperature Sensor Fault | View Details |
| F11 |
The fan runs continuously or not at all, with an F11 error on the display.
|
Cooling Fan Control Fault | View Details |
| F12 |
The display shows F12 and the oven beeps, often after a power cut or surge.
|
EEPROM / Configuration Data Error | View Details |
| F13 |
The oven display shows F13, and the interior light and fan may not operate.
|
Low Voltage / Power Supply Fault | View Details |
| F14 |
The pyrolytic self-clean cycle will not start, and F14 is displayed.
|
Pyrolytic System Fault | View Details |
| F15 |
The oven light and fan work, but there is no heat, and F15 is displayed intermittently.
|
Relay Stuck / Heater Drive Fault | View Details |
| F16 |
The display shows F16, and the oven fan runs, but the temperature cannot be set correctly.
|
Temperature Calibration / Sensor Range Fault | View Details |
| F17 |
The oven display shows F17 and beeps continuously; no functions can be selected.
|
Stuck Key / Touch Panel Fault | View Details |
| F18 |
Oven shows F18 and may shut down unexpectedly during use.
|
Internal Temperature / Heat Sink Overheat Fault | View Details |
| – |
Condensation forms heavily on the oven door and drips onto the floor during cooking.
|
Excess Condensation / Steam Management Issue | View Details |
| – |
Control knobs become very stiff or difficult to turn.
|
Knob / Shaft Binding | View Details |
| – |
Oven cabinet sides and control panel become excessively hot during normal cooking.
|
Cooling / Ventilation Deficiency | View Details |
| – |
Oven clock/timer display is blank, but the oven may still heat using manual controls.
|
Clock / Display Power Loss | View Details |
| – |
Oven does not heat at all, no error code, fan and light may or may not work.
|
No Heat Condition – General Power or Heating Circuit Failure | View Details |
| – |
Oven door glass has become loose or rattles when opening/closing.
|
Door Glass Mounting / Bracket Failure | View Details |
| – |
Oven door seal is damaged, or heat escapes around the door, causing surrounding cabinets to overheat.
|
Door Gasket / Seal Failure | View Details |
| – |
Oven door will not close fully, leaving a gap and causing heat loss.
|
Door Hinge / Hinge Receiver Wear | View Details |
| – |
Oven door will not open after use (non-pyrolytic model), feels jammed.
|
Mechanical Door Latch Jam | View Details |
| – |
Oven enamel is flaking, or rust spots appear inside the cavity.
|
Cavity Enamel Degradation | View Details |
| – |
Oven fan runs loudly, with a grinding or rattling noise during operation.
|
Fan Bearing Wear / Fan Blade Damage | View Details |
| – |
Oven heats but takes a very long time to reach temperature or never gets fully hot.
|
Partial Heating / Weak Heating | View Details |
| – |
Oven interior light does not work, but the oven heats normally.
|
Oven Lamp Failure | View Details |
| – |
Oven light works but the fan does not run in fan oven mode.
|
Oven Circulation Fan Failure | View Details |
| – |
Oven overheats and burns food even at low settings, no error code.
|
Thermostat Stuck Closed / Sensor Misreading | View Details |
| – |
Oven trips the circuit breaker or RCD when turned on or when a specific function is selected.
|
Electrical Short or Earth Leakage | View Details |
| – |
The grill in the top oven works only on one side or heats unevenly.
|
Dual Grill Element Partial Failure | View Details |
| – |
The oven cavity light and fan come on as soon as power is applied, even with the controls off.
|
Stuck Relay or Shorted Selector Contacts | View Details |
| – |
The oven emits a strong burning smell or smoke during use.
|
Contamination / Residue Burning | View Details |
| – |
The oven makes a metallic clicking or popping noise as it heats and cools.
|
Thermal Expansion Noise | View Details |
| – |
The oven temperature is inaccurate compared to the set temperature (too hot or too cold) without showing an error.
|
Temperature Calibration Drift | View Details |
| – |
The oven will not start unless the clock is set, and the user cannot figure out how to set it.
|
Clock Not Set / Auto Mode Engaged | View Details |
| – |
The timer alarm is very quiet or does not sound at all.
|
Buzzer / Sounder Failure | View Details |
| – |
The top oven in a double oven unit does not heat, but the bottom oven works normally (no error code).
|
Secondary (Top) Oven Heating Failure | View Details |
No matching codes found
Advertisements