Belling Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
d0
Induction hob shows d0 or similar; controls are locked, and there is no heating.
Child Lock / Key Lock Activated
E1
Induction hob displays E1 and beeps; no heating on the affected zone.
Pan Not Detected / Incompatible Cookware
E2
Induction hob shows E2 and shuts down the zone.
Induction Zone Overheat Protection
E3
Induction hob displays E3 when turned on; no zones operate.
Supply Voltage Out of Range
E4
Induction hob shows E4 on one zone; the zone will not heat.
Induction Coil or Power Stage Fault
E5
Induction hob displays E5; zones shut down unexpectedly.
Internal Temperature Sensor Error
E6
Induction hob shows E6 and beeps continuously.
Touch Control Panel Fault
F1
Main oven will not heat, display shows F1 fault code
Main Oven Temperature Sensor Circuit Fault
F2
Top oven or auxiliary oven not heating, F2 displayed on clock or control panel
Secondary Oven Temperature Sensor Circuit Fault
F3
Main oven overheats or cuts out, F3 error appears on display
Oven Overtemperature / Safety Thermostat Trip
F4
Oven display shows F4 and oven will not heat or shuts down shortly after starting
Oven Cavity Overheat or Cooling System Failure
F5
Induction hob zone not working, F5 flashes on the hob display
Induction Coil Overheat or Pan Detection Fault
F6
Induction hob beeps and shows F6, zone will not heat
Induction Power Module Communication or Supply Fault
F7
Induction hob shows F7 on one or more zones, intermittent heating
Induction Temperature Sensor or IGBT Overheat Fault
F8
Induction hob displays F8 and will not start any zone
Cooling Fan Failure or General Overheat Protection
F9
Induction hob shows F9; some or all zones are inoperative.
Internal Configuration or Calibration Error
— —
Oven display shows dashes or an unresponsive clock; oven functions are disabled.
Clock / Timer Not Set or Control Lock
Symptom
Ceramic hob indicator light stays on even when all zones are off and cool
Stuck Hot Surface Indicator Circuit
Symptom
Control knobs on hob are stiff, hard to turn, or seized
Contaminated or Damaged Gas Tap / Valve
Symptom
Electric ceramic hob zone not heating or only heating partially
Radiant Heating Element Failure
Symptom
Electric oven not heating at all; the fan runs, but there is no heat in any mode.
Open Heating Element or Supply Fault
Symptom
Gas hob burner lights but goes out when knob is released
Flame Failure Device (FFD) / Thermocouple Not Holding
Symptom
Gas oven not heating properly or uneven cooking
Gas Burner Combustion / Circulation Issue
Symptom
Gas oven or gas hob burners will not ignite, clicking heard but no flame
Ignition Failure / Gas Supply Issue
Symptom
Main oven heats but does not reach set temperature or cooks food unevenly
Oven Thermostat Calibration or Element Degradation
Symptom
Oven door glass is loose, rattling, or the inner glass has fallen out.
Door Glass Retainer or Bracket Failure
Symptom
Oven door will not close fully or heat escapes around door
Door Hinge or Seal Failure
Symptom
Oven fan is noisy, rattling, or scraping during operation.
Worn or Obstructed Oven Fan Motor
Symptom
Oven light not working but oven heats normally
Oven Lamp or Lamp Holder Failure
Symptom
Oven trips the household circuit breaker or RCD when turned on
Earth Leakage or Short Circuit in Heating Circuit
Symptom
Strong burning smell or smoke from the oven during use.
Contamination on Heating Elements or Insulation
Symptom
The clock and display work, but none of the oven functions start (no heat, no fan).
Selector Switch or Function Switch Failure
Symptom
The control panel or knobs become excessively hot during oven use.
Cooling Airflow or Door Seal Problem
Symptom
The digital display flickers, dims, or goes blank intermittently.
Power Supply or Display PCB Fault
Symptom
The grill element only heats on one side or unevenly.
Partially Failed Grill Element
Symptom
The grill works, but the main oven does not heat.
Main Oven Element or Thermostat Failure
Symptom
The oven interior light and fan run, but the element does not heat in fan oven mode.
Fan Oven Element Open Circuit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| d0 |
Induction hob shows d0 or similar; controls are locked, and there is no heating.
|
Child Lock / Key Lock Activated | View Details |
| E1 |
Induction hob displays E1 and beeps; no heating on the affected zone.
|
Pan Not Detected / Incompatible Cookware | View Details |
| E2 |
Induction hob shows E2 and shuts down the zone.
|
Induction Zone Overheat Protection | View Details |
| E3 |
Induction hob displays E3 when turned on; no zones operate.
|
Supply Voltage Out of Range | View Details |
| E4 |
Induction hob shows E4 on one zone; the zone will not heat.
|
Induction Coil or Power Stage Fault | View Details |
| E5 |
Induction hob displays E5; zones shut down unexpectedly.
|
Internal Temperature Sensor Error | View Details |
| E6 |
Induction hob shows E6 and beeps continuously.
|
Touch Control Panel Fault | View Details |
| F1 |
Main oven will not heat, display shows F1 fault code
|
Main Oven Temperature Sensor Circuit Fault | View Details |
| F2 |
Top oven or auxiliary oven not heating, F2 displayed on clock or control panel
|
Secondary Oven Temperature Sensor Circuit Fault | View Details |
| F3 |
Main oven overheats or cuts out, F3 error appears on display
|
Oven Overtemperature / Safety Thermostat Trip | View Details |
| F4 |
Oven display shows F4 and oven will not heat or shuts down shortly after starting
|
Oven Cavity Overheat or Cooling System Failure | View Details |
| F5 |
Induction hob zone not working, F5 flashes on the hob display
|
Induction Coil Overheat or Pan Detection Fault | View Details |
| F6 |
Induction hob beeps and shows F6, zone will not heat
|
Induction Power Module Communication or Supply Fault | View Details |
| F7 |
Induction hob shows F7 on one or more zones, intermittent heating
|
Induction Temperature Sensor or IGBT Overheat Fault | View Details |
| F8 |
Induction hob displays F8 and will not start any zone
|
Cooling Fan Failure or General Overheat Protection | View Details |
| F9 |
Induction hob shows F9; some or all zones are inoperative.
|
Internal Configuration or Calibration Error | View Details |
| — — |
Oven display shows dashes or an unresponsive clock; oven functions are disabled.
|
Clock / Timer Not Set or Control Lock | View Details |
| – |
Ceramic hob indicator light stays on even when all zones are off and cool
|
Stuck Hot Surface Indicator Circuit | View Details |
| – |
Control knobs on hob are stiff, hard to turn, or seized
|
Contaminated or Damaged Gas Tap / Valve | View Details |
| – |
Electric ceramic hob zone not heating or only heating partially
|
Radiant Heating Element Failure | View Details |
| – |
Electric oven not heating at all; the fan runs, but there is no heat in any mode.
|
Open Heating Element or Supply Fault | View Details |
| – |
Gas hob burner lights but goes out when knob is released
|
Flame Failure Device (FFD) / Thermocouple Not Holding | View Details |
| – |
Gas oven not heating properly or uneven cooking
|
Gas Burner Combustion / Circulation Issue | View Details |
| – |
Gas oven or gas hob burners will not ignite, clicking heard but no flame
|
Ignition Failure / Gas Supply Issue | View Details |
| – |
Main oven heats but does not reach set temperature or cooks food unevenly
|
Oven Thermostat Calibration or Element Degradation | View Details |
| – |
Oven door glass is loose, rattling, or the inner glass has fallen out.
|
Door Glass Retainer or Bracket Failure | View Details |
| – |
Oven door will not close fully or heat escapes around door
|
Door Hinge or Seal Failure | View Details |
| – |
Oven fan is noisy, rattling, or scraping during operation.
|
Worn or Obstructed Oven Fan Motor | View Details |
| – |
Oven light not working but oven heats normally
|
Oven Lamp or Lamp Holder Failure | View Details |
| – |
Oven trips the household circuit breaker or RCD when turned on
|
Earth Leakage or Short Circuit in Heating Circuit | View Details |
| – |
Strong burning smell or smoke from the oven during use.
|
Contamination on Heating Elements or Insulation | View Details |
| – |
The clock and display work, but none of the oven functions start (no heat, no fan).
|
Selector Switch or Function Switch Failure | View Details |
| – |
The control panel or knobs become excessively hot during oven use.
|
Cooling Airflow or Door Seal Problem | View Details |
| – |
The digital display flickers, dims, or goes blank intermittently.
|
Power Supply or Display PCB Fault | View Details |
| – |
The grill element only heats on one side or unevenly.
|
Partially Failed Grill Element | View Details |
| – |
The grill works, but the main oven does not heat.
|
Main Oven Element or Thermostat Failure | View Details |
| – |
The oven interior light and fan run, but the element does not heat in fan oven mode.
|
Fan Oven Element Open Circuit | View Details |
No matching codes found
Advertisements