Teka Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
The ice maker does not power on; the display is blank, with no lights or sounds.
Main Power Supply or Control Board Failure
E02
The ice maker powers on but does not start ice production; error E02 is displayed.
Water Inlet Failure / Low Water Supply
E03
Error E03 is displayed, and the ice maker stops; water is present in the bin or internal sump, with possible overflow.
Drain Pump or Drain System Failure
E04
Error E04 is displayed, ice production stops, and the unit may be too warm inside.
High Temperature / Refrigeration System Fault
E05
Error E05 is displayed, and the ice maker stops mid-cycle, often during the freeze stage.
Evaporator Temperature Sensor / Thermistor Fault
E06
E06 error: ice maker does not harvest ice or stops at the end of the freeze cycle.
Harvest Sensor / Ice Thickness Sensor Fault
E07
E07 error: the ice bin is empty but the unit indicates 'bin full' and stops making ice.
Ice Bin Level Sensor / Infrared Sensor Fault
E08
E08 error: compressor does not start or stops shortly after starting.
Compressor Start Circuit / Overload Protection Fault
E09
E09 error: water continuously flows into the ice maker or overflows the sump.
Water Level Control / Inlet Valve Stuck Open
E10
E10 error: fan noise is absent, and the unit overheats or stops ice production.
Evaporator Fan Motor Failure
E11
E11 error: unit fails to complete a cleaning or rinse cycle.
Cleaning Cycle / Circulation Pump Fault
E12
E12 error: keypad or touch controls are unresponsive or erratic.
User Interface / Touch Control Panel Fault
E13
E13 error: internal leak detected; unit may shut down and show an alarm.
Internal Water Leak / Leak Sensor Activation
E14
E14 error: abnormal ice size or shape; unit may stop with an alarm.
Ice Thickness Calibration / Sensor Range Error
E15
E15 error: unit beeps and stops, often after a power fluctuation.
EEPROM / Control Board Memory Error
E16
E16 error: The unit indicates a low ambient temperature and stops ice production.
Ambient Temperature Sensor Fault
E17
E17 error: The unit reports a high ambient temperature and suspends ice production.
Over-Temperature Protection / High Ambient Sensor Reading
E18
E18 error: The unit fails to defrost properly, leading to heavy ice buildup on the evaporator.
Defrost System Failure
E19
E19 error: The unit indicates the door or bin is open even when it is closed.
Door Switch / Bin Door Sensor Fault
E20
E20 error: The unit reports low water quality or scale buildup, and may stop and request cleaning.
Water Quality / Scale Sensor Alert
Symptom
Display works but some buttons do not respond
Partial Keypad Failure
Symptom
Ice appears cloudy or white instead of clear
Cloudy Ice Formation
Symptom
Ice cubes are too large or fused together in clumps.
Excessive Ice Thickness / Overfreezing
Symptom
Ice cubes are too small or thin.
Insufficient Ice Thickness
Symptom
Ice has a bad taste or odor
Contaminated Ice / Odor Transfer
Symptom
Ice maker interior or exterior feels hot to the touch
Overheating Cabinet / Poor Ventilation
Symptom
Ice maker is very noisy during operation (rattling, grinding, or buzzing)
Excessive Operational Noise
Symptom
Ice maker runs continuously without stopping, even when bin is full
Bin Full Detection Failure
Symptom
Ice maker starts then stops after a few minutes
Premature Cycle Termination
Symptom
Ice maker vibrates excessively or moves on the floor
Excessive Vibration
Symptom
Ice maker will not start at all (no cycle) but display is on
Start Inhibit / Control Lock or Sensor Interlock
Symptom
Ice sticks together in the bin and forms large clumps
Ice Clumping in Storage Bin
Symptom
Interior light does not turn on when the door is opened
Cabinet Light Failure
Symptom
Loud knocking or banging noise during ice harvest
Mechanical Impact During Harvest
Symptom
The ice maker is leaking water onto the floor.
External Water Leak
Symptom
The ice maker produces ice, but the output is very low compared to normal.
Reduced Ice Production
Symptom
The ice maker runs but produces no ice at all.
No Ice Production Despite Operation
Symptom
Unit trips the household circuit breaker when it starts
Electrical Short or Overcurrent
Symptom
Water pooling inside the ice bin or cabinet
Internal Drainage Problem
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
The ice maker does not power on; the display is blank, with no lights or sounds.
|
Main Power Supply or Control Board Failure | View Details |
| E02 |
The ice maker powers on but does not start ice production; error E02 is displayed.
|
Water Inlet Failure / Low Water Supply | View Details |
| E03 |
Error E03 is displayed, and the ice maker stops; water is present in the bin or internal sump, with possible overflow.
|
Drain Pump or Drain System Failure | View Details |
| E04 |
Error E04 is displayed, ice production stops, and the unit may be too warm inside.
|
High Temperature / Refrigeration System Fault | View Details |
| E05 |
Error E05 is displayed, and the ice maker stops mid-cycle, often during the freeze stage.
|
Evaporator Temperature Sensor / Thermistor Fault | View Details |
| E06 |
E06 error: ice maker does not harvest ice or stops at the end of the freeze cycle.
|
Harvest Sensor / Ice Thickness Sensor Fault | View Details |
| E07 |
E07 error: the ice bin is empty but the unit indicates 'bin full' and stops making ice.
|
Ice Bin Level Sensor / Infrared Sensor Fault | View Details |
| E08 |
E08 error: compressor does not start or stops shortly after starting.
|
Compressor Start Circuit / Overload Protection Fault | View Details |
| E09 |
E09 error: water continuously flows into the ice maker or overflows the sump.
|
Water Level Control / Inlet Valve Stuck Open | View Details |
| E10 |
E10 error: fan noise is absent, and the unit overheats or stops ice production.
|
Evaporator Fan Motor Failure | View Details |
| E11 |
E11 error: unit fails to complete a cleaning or rinse cycle.
|
Cleaning Cycle / Circulation Pump Fault | View Details |
| E12 |
E12 error: keypad or touch controls are unresponsive or erratic.
|
User Interface / Touch Control Panel Fault | View Details |
| E13 |
E13 error: internal leak detected; unit may shut down and show an alarm.
|
Internal Water Leak / Leak Sensor Activation | View Details |
| E14 |
E14 error: abnormal ice size or shape; unit may stop with an alarm.
|
Ice Thickness Calibration / Sensor Range Error | View Details |
| E15 |
E15 error: unit beeps and stops, often after a power fluctuation.
|
EEPROM / Control Board Memory Error | View Details |
| E16 |
E16 error: The unit indicates a low ambient temperature and stops ice production.
|
Ambient Temperature Sensor Fault | View Details |
| E17 |
E17 error: The unit reports a high ambient temperature and suspends ice production.
|
Over-Temperature Protection / High Ambient Sensor Reading | View Details |
| E18 |
E18 error: The unit fails to defrost properly, leading to heavy ice buildup on the evaporator.
|
Defrost System Failure | View Details |
| E19 |
E19 error: The unit indicates the door or bin is open even when it is closed.
|
Door Switch / Bin Door Sensor Fault | View Details |
| E20 |
E20 error: The unit reports low water quality or scale buildup, and may stop and request cleaning.
|
Water Quality / Scale Sensor Alert | View Details |
| – |
Display works but some buttons do not respond
|
Partial Keypad Failure | View Details |
| – |
Ice appears cloudy or white instead of clear
|
Cloudy Ice Formation | View Details |
| – |
Ice cubes are too large or fused together in clumps.
|
Excessive Ice Thickness / Overfreezing | View Details |
| – |
Ice cubes are too small or thin.
|
Insufficient Ice Thickness | View Details |
| – |
Ice has a bad taste or odor
|
Contaminated Ice / Odor Transfer | View Details |
| – |
Ice maker interior or exterior feels hot to the touch
|
Overheating Cabinet / Poor Ventilation | View Details |
| – |
Ice maker is very noisy during operation (rattling, grinding, or buzzing)
|
Excessive Operational Noise | View Details |
| – |
Ice maker runs continuously without stopping, even when bin is full
|
Bin Full Detection Failure | View Details |
| – |
Ice maker starts then stops after a few minutes
|
Premature Cycle Termination | View Details |
| – |
Ice maker vibrates excessively or moves on the floor
|
Excessive Vibration | View Details |
| – |
Ice maker will not start at all (no cycle) but display is on
|
Start Inhibit / Control Lock or Sensor Interlock | View Details |
| – |
Ice sticks together in the bin and forms large clumps
|
Ice Clumping in Storage Bin | View Details |
| – |
Interior light does not turn on when the door is opened
|
Cabinet Light Failure | View Details |
| – |
Loud knocking or banging noise during ice harvest
|
Mechanical Impact During Harvest | View Details |
| – |
The ice maker is leaking water onto the floor.
|
External Water Leak | View Details |
| – |
The ice maker produces ice, but the output is very low compared to normal.
|
Reduced Ice Production | View Details |
| – |
The ice maker runs but produces no ice at all.
|
No Ice Production Despite Operation | View Details |
| – |
Unit trips the household circuit breaker when it starts
|
Electrical Short or Overcurrent | View Details |
| – |
Water pooling inside the ice bin or cabinet
|
Internal Drainage Problem | View Details |
No matching codes found
Advertisements