Electrolux Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E15
Oven displays E15; may not heat or may shut down.
Power supply or low voltage detection fault.
E24
Oven displays E24; may not start or may shut off.
Internal communication or configuration error.
E32
Oven displays E32; temperature control is inaccurate or inoperative.
Temperature sensor calibration or reading error.
E41
Oven displays E41; door status error (door open/closed not detected correctly).
Door switch or door sensor fault.
E45
Oven displays E45; fan or airflow-related error.
Convection or cooling fan feedback fault.
E50
Oven displays E50, general power or relay error; may not heat.
Power relay or triac failure on control board
F1
The oven beeps and displays F1; controls are unresponsive or random beeping occurs even when not in use.
Electronic Oven Control (EOC) keypad or control board failure
F10
Oven displays F10; it may overheat or shut down, and the fan may run continuously.
Runaway temperature / sensor out of range.
F11
Oven displays F11; there may be continuous beeping, and the keypad may not respond.
Shorted keypad or stuck key.
F12
Oven displays F12; it may not respond to commands.
Communication error between the display and control board.
F13
Oven displays F13, often related to the warming drawer or an auxiliary function.
Warming drawer or auxiliary sensor/communication fault.
F2
The oven displays F2 and may beep continuously; the oven may overheat or shut down during bake or broil.
Oven temperature runaway / high temperature fault
F3
The oven displays F3 and may stop heating or cancel the cycle.
Oven temperature sensor circuit open
F30
Oven displays F30; it will not heat or shuts off.
Open oven temperature sensor circuit.
F31
Oven displays F31; it may not heat correctly.
Shorted oven temperature sensor circuit.
F4
The oven displays F4 and may shut off or fail to heat correctly.
Oven temperature sensor circuit shorted
F5
The oven displays F5 and may not start or may shut off unexpectedly.
Control board relay or watchdog failure
F7
Oven displays F7; the keypad may not respond or may act erratically.
Keypad stuck key or keypad/EOC communication fault.
F8
Oven displays F8; it may not heat or may shut down during operation.
Cooling fan or over-temperature protection fault.
F9
Oven displays F9; the door may remain locked or will not lock/unlock.
Oven door lock circuit fault.
F90
Oven displays F90; the door lock will not engage or disengage, often after a self-clean cycle.
Oven door lock motor failure or lock circuit fault.
F91
Oven displays F91; door will not lock for self-clean.
Door lock not reaching locked position.
F92
Oven displays F92; door will not unlock after self-clean.
Door lock not reaching unlocked position.
F93
Oven displays F93; self-clean cycle will not start.
Door lock not closing within allowed time.
F94
Oven displays F94; self-clean aborted due to door lock error.
Door lock sequence error during self-clean.
F95
Oven displays F95; door lock error, often after a power interruption during self-clean.
Door lock position not recognized after power loss.
Symptom
Bake function not working, but broil still heats.
Bake element circuit failure
Symptom
Broil function not working, but bake heats normally.
Broil element circuit failure
Symptom
Control panel illuminates, but buttons do not respond or respond intermittently.
Unresponsive touchpad / keypad failure
Symptom
Control panel is unresponsive, display is blank, and the oven has power at the outlet.
No display / Unresponsive control panel
Symptom
Convection fan not running, making convection mode ineffective.
Convection fan motor failure
Symptom
Oven display shows incorrect time or loses time frequently.
Clock/timekeeping instability
Symptom
Oven door will not close fully or appears misaligned.
Door hinge or latch misalignment
Symptom
Oven door will not lock for self-clean, but normal baking functions correctly.
Self-clean door lock failure
Symptom
Oven door will not open after self-clean, with no error code displayed.
Door lock stuck in locked position
Symptom
Oven emits a strong burning smell or smoke during normal baking (not during first use).
Overheating residue or component overheating
Symptom
Oven exterior or control panel becomes excessively hot to the touch during use.
Insufficient cooling or door seal leakage
Symptom
Oven glass door fogs up excessively or moisture drips from the door.
Condensation and door seal issue
Symptom
Oven heats but does not reach the set temperature or takes excessively long to preheat.
Underheating / extended preheat time
Symptom
Oven light not working, but the oven heats normally.
Oven cavity light circuit failure
Symptom
Oven overheats, burning food even at normal settings, with no error code displayed.
Overheating / temperature regulation failure
Symptom
Oven produces unusual noises such as grinding, rattling, or squealing during operation.
Mechanical noise from fan or loose components
Symptom
Oven temperature varies widely during baking, causing uneven cooking.
Poor temperature regulation / cycling
Symptom
Oven trips the circuit breaker when powered on or during heating.
Electrical short or ground fault
Symptom
Oven will not heat at all, no error code displayed, and the control panel appears normal.
No heat due to an open heating circuit
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E15 |
Oven displays E15; may not heat or may shut down.
|
Power supply or low voltage detection fault. | View Details |
| E24 |
Oven displays E24; may not start or may shut off.
|
Internal communication or configuration error. | View Details |
| E32 |
Oven displays E32; temperature control is inaccurate or inoperative.
|
Temperature sensor calibration or reading error. | View Details |
| E41 |
Oven displays E41; door status error (door open/closed not detected correctly).
|
Door switch or door sensor fault. | View Details |
| E45 |
Oven displays E45; fan or airflow-related error.
|
Convection or cooling fan feedback fault. | View Details |
| E50 |
Oven displays E50, general power or relay error; may not heat.
|
Power relay or triac failure on control board | View Details |
| F1 |
The oven beeps and displays F1; controls are unresponsive or random beeping occurs even when not in use.
|
Electronic Oven Control (EOC) keypad or control board failure | View Details |
| F10 |
Oven displays F10; it may overheat or shut down, and the fan may run continuously.
|
Runaway temperature / sensor out of range. | View Details |
| F11 |
Oven displays F11; there may be continuous beeping, and the keypad may not respond.
|
Shorted keypad or stuck key. | View Details |
| F12 |
Oven displays F12; it may not respond to commands.
|
Communication error between the display and control board. | View Details |
| F13 |
Oven displays F13, often related to the warming drawer or an auxiliary function.
|
Warming drawer or auxiliary sensor/communication fault. | View Details |
| F2 |
The oven displays F2 and may beep continuously; the oven may overheat or shut down during bake or broil.
|
Oven temperature runaway / high temperature fault | View Details |
| F3 |
The oven displays F3 and may stop heating or cancel the cycle.
|
Oven temperature sensor circuit open | View Details |
| F30 |
Oven displays F30; it will not heat or shuts off.
|
Open oven temperature sensor circuit. | View Details |
| F31 |
Oven displays F31; it may not heat correctly.
|
Shorted oven temperature sensor circuit. | View Details |
| F4 |
The oven displays F4 and may shut off or fail to heat correctly.
|
Oven temperature sensor circuit shorted | View Details |
| F5 |
The oven displays F5 and may not start or may shut off unexpectedly.
|
Control board relay or watchdog failure | View Details |
| F7 |
Oven displays F7; the keypad may not respond or may act erratically.
|
Keypad stuck key or keypad/EOC communication fault. | View Details |
| F8 |
Oven displays F8; it may not heat or may shut down during operation.
|
Cooling fan or over-temperature protection fault. | View Details |
| F9 |
Oven displays F9; the door may remain locked or will not lock/unlock.
|
Oven door lock circuit fault. | View Details |
| F90 |
Oven displays F90; the door lock will not engage or disengage, often after a self-clean cycle.
|
Oven door lock motor failure or lock circuit fault. | View Details |
| F91 |
Oven displays F91; door will not lock for self-clean.
|
Door lock not reaching locked position. | View Details |
| F92 |
Oven displays F92; door will not unlock after self-clean.
|
Door lock not reaching unlocked position. | View Details |
| F93 |
Oven displays F93; self-clean cycle will not start.
|
Door lock not closing within allowed time. | View Details |
| F94 |
Oven displays F94; self-clean aborted due to door lock error.
|
Door lock sequence error during self-clean. | View Details |
| F95 |
Oven displays F95; door lock error, often after a power interruption during self-clean.
|
Door lock position not recognized after power loss. | View Details |
| – |
Bake function not working, but broil still heats.
|
Bake element circuit failure | View Details |
| – |
Broil function not working, but bake heats normally.
|
Broil element circuit failure | View Details |
| – |
Control panel illuminates, but buttons do not respond or respond intermittently.
|
Unresponsive touchpad / keypad failure | View Details |
| – |
Control panel is unresponsive, display is blank, and the oven has power at the outlet.
|
No display / Unresponsive control panel | View Details |
| – |
Convection fan not running, making convection mode ineffective.
|
Convection fan motor failure | View Details |
| – |
Oven display shows incorrect time or loses time frequently.
|
Clock/timekeeping instability | View Details |
| – |
Oven door will not close fully or appears misaligned.
|
Door hinge or latch misalignment | View Details |
| – |
Oven door will not lock for self-clean, but normal baking functions correctly.
|
Self-clean door lock failure | View Details |
| – |
Oven door will not open after self-clean, with no error code displayed.
|
Door lock stuck in locked position | View Details |
| – |
Oven emits a strong burning smell or smoke during normal baking (not during first use).
|
Overheating residue or component overheating | View Details |
| – |
Oven exterior or control panel becomes excessively hot to the touch during use.
|
Insufficient cooling or door seal leakage | View Details |
| – |
Oven glass door fogs up excessively or moisture drips from the door.
|
Condensation and door seal issue | View Details |
| – |
Oven heats but does not reach the set temperature or takes excessively long to preheat.
|
Underheating / extended preheat time | View Details |
| – |
Oven light not working, but the oven heats normally.
|
Oven cavity light circuit failure | View Details |
| – |
Oven overheats, burning food even at normal settings, with no error code displayed.
|
Overheating / temperature regulation failure | View Details |
| – |
Oven produces unusual noises such as grinding, rattling, or squealing during operation.
|
Mechanical noise from fan or loose components | View Details |
| – |
Oven temperature varies widely during baking, causing uneven cooking.
|
Poor temperature regulation / cycling | View Details |
| – |
Oven trips the circuit breaker when powered on or during heating.
|
Electrical short or ground fault | View Details |
| – |
Oven will not heat at all, no error code displayed, and the control panel appears normal.
|
No heat due to an open heating circuit | View Details |
No matching codes found
Advertisements