GE Profile Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
Bad Line
Display shows Bad Line or similar; oven and cooktop may not operate.
Incorrect or missing line voltage.
Burner Error
Induction or radiant cooktop zone shows an error icon or flashes when a pan is placed.
Cooktop element or sensor fault.
ERR
Display shows ERR when pressing certain keys or trying to set the temperature or time.
Invalid key entry or keypad recognition error.
F0
Beeping, oven display shows F0, sometimes intermittent beeping even when not using the oven
Stuck or shorted oven keypad
F1
Oven beeps and displays F1, often on power-up or when idle
Oven control board failure or keypad short
F10
F10 error: oven overheats or temperature climbs far above the set point.
Runaway temperature or control board sensing error.
F2
Oven beeps and shows F2, often when baking or broiling; oven may overheat
Oven temperature runaway / over-temperature condition
F20
F20 error: oven will not start or stops shortly after starting.
Communication or configuration error in the control system.
F3
F3 error appears, oven will not heat or shuts off shortly after starting
Open or shorted oven temperature sensor circuit
F31
F31 error: oven will not heat or the temperature reading is erratic.
Open probe or sensor circuit (meat probe or oven sensor, depending on model).
F32
F32 error: oven temperature display incorrect or oven will not start.
Shorted probe or sensor circuit.
F34
F34 error: oven fan or cooling system fault on some GE Profile wall-oven style ranges.
Cooling fan speed or feedback error.
F4
F4 error code, oven may not start or may shut off unexpectedly
Shorted oven temperature sensor circuit
F7
F7 error, continuous beeping, sometimes random key presses registered.
Keypad short or control board key input failure.
F76
F76 error: lower oven or auxiliary oven communication fault on dual-oven GE Profile ranges.
Communication failure between upper and lower oven controls.
F9
F9 error, oven door will not lock or unlock during self-clean, or the door lock motor runs continuously.
Oven door lock circuit failure.
F9E0
F9E0 or similar code: oven door lock error specifically during self-clean on newer GE Profile models.
Electronic door lock communication failure.
LOC
Display shows 'LOC' or 'Control Locked'; oven and/or cooktop buttons do not respond.
Control lock feature engaged.
LOC DOOR
LOC DOOR displayed when trying to start self-clean; oven will not enter the clean cycle.
Door not locking for self-clean.
LOCKED DOOR
Display shows LOCKED DOOR or a lock icon; oven door will not open even when cool.
Door lock mechanism stuck in locked position.
PF
Display shows PF or Power Failure, clock resets, and oven cancels cooking.
Power interruption detected.
SAB
Display shows SAB or Sabbath mode; oven appears unresponsive to normal commands.
Sabbath mode enabled.
Symptom
All gas surface burners fail to ignite (no clicking on any knob).
Spark ignition module or power supply failure.
Symptom
Clock or display is blank but cooktop may still work
Control display power failure
Symptom
Control knobs are hard to turn or feel loose
Worn or contaminated control valve stems or knob inserts
Symptom
Cooktop glass is cracked or shattered
Damaged ceramic glass surface
Symptom
Electric cooktop element cycles on and off too frequently or does not reach the set temperature.
Temperature limiter or control calibration issue.
Symptom
Electric radiant cooktop element will not heat at all.
Open surface element or control failure.
Symptom
Gas oven will not ignite (no flame; may click or glow, but no ignition).
Gas oven ignition failure.
Symptom
Gas surface burner clicks but will not light, or lights slowly with a yellow/orange flame.
Poor gas flow or burner contamination.
Symptom
Gas surface burner will not ignite (no clicking or weak/no spark at one burner).
Ignition system failure at an individual burner.
Symptom
Induction cooktop zone does not recognize the pan (flashes or beeps, no heat).
Pan detection failure.
Symptom
Oven door will not close fully or has a large gap.
Door alignment or hinge failure.
Symptom
Oven door will not stay open at mid-position or slams shut.
Weak or broken door hinge springs.
Symptom
Oven light will not turn on.
Oven cavity lighting failure.
Symptom
Oven or cooktop produces excessive smoke or burning smell during use
Residue or spill burning off
Symptom
Oven temperature too hot or too cold compared to the set temperature.
Oven temperature calibration issue.
Symptom
Oven will not heat in bake mode (broil may still work).
Bake element circuit failure.
Symptom
Oven will not heat in broil mode (bake may still work).
Broil element circuit failure.
Symptom
Range or cooktop has strong gas odor when burners are off
Gas leak in supply or manifold
Symptom
Range or cooktop top surface is excessively hot to the touch during oven use
Cooling airflow or insulation issue
Symptom
Range trips breaker when oven or a specific burner is turned on
Electrical short to ground
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| Bad Line |
Display shows Bad Line or similar; oven and cooktop may not operate.
|
Incorrect or missing line voltage. | View Details |
| Burner Error |
Induction or radiant cooktop zone shows an error icon or flashes when a pan is placed.
|
Cooktop element or sensor fault. | View Details |
| ERR |
Display shows ERR when pressing certain keys or trying to set the temperature or time.
|
Invalid key entry or keypad recognition error. | View Details |
| F0 |
Beeping, oven display shows F0, sometimes intermittent beeping even when not using the oven
|
Stuck or shorted oven keypad | View Details |
| F1 |
Oven beeps and displays F1, often on power-up or when idle
|
Oven control board failure or keypad short | View Details |
| F10 |
F10 error: oven overheats or temperature climbs far above the set point.
|
Runaway temperature or control board sensing error. | View Details |
| F2 |
Oven beeps and shows F2, often when baking or broiling; oven may overheat
|
Oven temperature runaway / over-temperature condition | View Details |
| F20 |
F20 error: oven will not start or stops shortly after starting.
|
Communication or configuration error in the control system. | View Details |
| F3 |
F3 error appears, oven will not heat or shuts off shortly after starting
|
Open or shorted oven temperature sensor circuit | View Details |
| F31 |
F31 error: oven will not heat or the temperature reading is erratic.
|
Open probe or sensor circuit (meat probe or oven sensor, depending on model). | View Details |
| F32 |
F32 error: oven temperature display incorrect or oven will not start.
|
Shorted probe or sensor circuit. | View Details |
| F34 |
F34 error: oven fan or cooling system fault on some GE Profile wall-oven style ranges.
|
Cooling fan speed or feedback error. | View Details |
| F4 |
F4 error code, oven may not start or may shut off unexpectedly
|
Shorted oven temperature sensor circuit | View Details |
| F7 |
F7 error, continuous beeping, sometimes random key presses registered.
|
Keypad short or control board key input failure. | View Details |
| F76 |
F76 error: lower oven or auxiliary oven communication fault on dual-oven GE Profile ranges.
|
Communication failure between upper and lower oven controls. | View Details |
| F9 |
F9 error, oven door will not lock or unlock during self-clean, or the door lock motor runs continuously.
|
Oven door lock circuit failure. | View Details |
| F9E0 |
F9E0 or similar code: oven door lock error specifically during self-clean on newer GE Profile models.
|
Electronic door lock communication failure. | View Details |
| LOC |
Display shows 'LOC' or 'Control Locked'; oven and/or cooktop buttons do not respond.
|
Control lock feature engaged. | View Details |
| LOC DOOR |
LOC DOOR displayed when trying to start self-clean; oven will not enter the clean cycle.
|
Door not locking for self-clean. | View Details |
| LOCKED DOOR |
Display shows LOCKED DOOR or a lock icon; oven door will not open even when cool.
|
Door lock mechanism stuck in locked position. | View Details |
| PF |
Display shows PF or Power Failure, clock resets, and oven cancels cooking.
|
Power interruption detected. | View Details |
| SAB |
Display shows SAB or Sabbath mode; oven appears unresponsive to normal commands.
|
Sabbath mode enabled. | View Details |
| – |
All gas surface burners fail to ignite (no clicking on any knob).
|
Spark ignition module or power supply failure. | View Details |
| – |
Clock or display is blank but cooktop may still work
|
Control display power failure | View Details |
| – |
Control knobs are hard to turn or feel loose
|
Worn or contaminated control valve stems or knob inserts | View Details |
| – |
Cooktop glass is cracked or shattered
|
Damaged ceramic glass surface | View Details |
| – |
Electric cooktop element cycles on and off too frequently or does not reach the set temperature.
|
Temperature limiter or control calibration issue. | View Details |
| – |
Electric radiant cooktop element will not heat at all.
|
Open surface element or control failure. | View Details |
| – |
Gas oven will not ignite (no flame; may click or glow, but no ignition).
|
Gas oven ignition failure. | View Details |
| – |
Gas surface burner clicks but will not light, or lights slowly with a yellow/orange flame.
|
Poor gas flow or burner contamination. | View Details |
| – |
Gas surface burner will not ignite (no clicking or weak/no spark at one burner).
|
Ignition system failure at an individual burner. | View Details |
| – |
Induction cooktop zone does not recognize the pan (flashes or beeps, no heat).
|
Pan detection failure. | View Details |
| – |
Oven door will not close fully or has a large gap.
|
Door alignment or hinge failure. | View Details |
| – |
Oven door will not stay open at mid-position or slams shut.
|
Weak or broken door hinge springs. | View Details |
| – |
Oven light will not turn on.
|
Oven cavity lighting failure. | View Details |
| – |
Oven or cooktop produces excessive smoke or burning smell during use
|
Residue or spill burning off | View Details |
| – |
Oven temperature too hot or too cold compared to the set temperature.
|
Oven temperature calibration issue. | View Details |
| – |
Oven will not heat in bake mode (broil may still work).
|
Bake element circuit failure. | View Details |
| – |
Oven will not heat in broil mode (bake may still work).
|
Broil element circuit failure. | View Details |
| – |
Range or cooktop has strong gas odor when burners are off
|
Gas leak in supply or manifold | View Details |
| – |
Range or cooktop top surface is excessively hot to the touch during oven use
|
Cooling airflow or insulation issue | View Details |
| – |
Range trips breaker when oven or a specific burner is turned on
|
Electrical short to ground | View Details |
No matching codes found
Advertisements