AEG Washing Machines Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E10
Washer does not fill with water or fills very slowly, E10 displayed on AEG washing machine
Water Inlet Timeout / Filling Fault
E11
Washer does not fill with water at all, E11 displayed on AEG washing machine
No Water Fill Detected
E13
AEG washing machine shows E13 and may stop mid-cycle, sometimes with water under or inside the base of the machine
Water Leakage in Base / Anti-Flood Activated
E20
The AEG washing machine does not drain or stops with water in the drum, and E20 is displayed.
Drain Pump / Drainage Fault
E21
The AEG washer shows E21 and will not drain properly, often with a loud humming sound from the pump.
Drain Pump Blocked or Jammed
E23
The AEG washing machine displays E23 and may not start or may stop mid-cycle with water inside.
Drain Pump Triac / Pump Control Fault
E24
The AEG washer shows E24, often related to drain pump control or wiring issues.
Drain Pump Feedback / Wiring Error
E30
The AEG washing machine shows E30 and will not start or stops with the pump running continuously.
Water Leakage / Anti-Flood System Activated
E31
The AEG washer displays E31 and may not fill or may overfill slightly before stopping.
Pressure Sensor / Water Level Sensor Fault
E32
The AEG washing machine shows E32, often during or after filling, sometimes with incorrect water levels.
Pressure Sensor Calibration / Signal Error
E33
The AEG washer displays E33 and may not heat or may stop during a wash cycle.
Pressure Switch / Heater Interlock Fault
E34
The AEG washing machine shows E34 and may refuse to start heating or may abort the cycle.
Pressure Switch / Safety Level Conflict
E35
AEG washer overfills or displays E35, sometimes with water visible in the door glass above the normal level.
Overfill / Overpressure Fault
E38
AEG washing machine shows E38, often associated with poor rinsing or incorrect water levels.
Blocked Pressure Chamber / Air Trap
E40
AEG washer will not start and shows E40 or a door symbol; the door may not lock.
Door Lock / Interlock Fault
E41
AEG washing machine shows E41; the door appears closed, but the machine thinks it is open.
Door Not Properly Closed Signal
E42
AEG washer shows E42; the door may not unlock at the end of the cycle.
Door Unlock Fault
E43
AEG washing machine shows E43 and will not start; this is often related to door lock control.
Door Lock Triac / Control Fault
E44
AEG washer shows E44, a door status signal error.
Door Status Sensor Fault
E45
AEG washing machine displays E45, an advanced door lock control error.
Door Lock Control Circuit Fault
E50
AEG washer shows an E50 series error, often with the drum not turning or intermittent spinning.
Motor / Motor Control General Fault
E51
AEG washing machine shows E51; the drum does not rotate, and it sometimes trips the breaker.
Motor Power Triac Short Circuit
E52
AEG washer shows E52; the drum may turn erratically or not reach full spin speed.
Tachometer Signal Fault
E53
AEG washing machine shows E53, motor control error.
Motor Control Circuit Fault
E54
AEG washer shows E54, drum may not reverse or may stop abruptly.
Motor Relay Stuck / Fault
E60
AEG washing machine shows E60 series error, clothes come out cold, and the cycle may take longer than normal.
Heating System General Fault
E61
AEG washer shows E61, water does not reach set temperature within expected time.
Heating Time-Out
E62
AEG washing machine shows E62, water overheats, possible steam from door.
Overheating / Overtemperature Fault
E66
AEG washer shows E66, no heating, sometimes with clicking noises from control board.
Heater Relay Fault
E70
AEG washing machine shows E70 series error, often related to temperature sensing.
NTC Temperature Sensor General Fault
E90
AEG washer shows E90 or E9x codes; the machine may not start or may behave erratically.
Communication / Configuration Error
E91
AEG washing machine shows E91, display may be blank or unresponsive.
No Communication with User Interface
E92
AEG washer shows E92, often after replacing a control board or UI.
Configuration Mismatch
E93
AEG washing machine displays error code E93: configuration error.
Invalid Configuration Data
E94
AEG washing machine displays error code E94: program configuration error.
Program Data Corruption
E95
AEG washing machine displays error code E95: internal communication error.
Internal Control Board Communication Fault
E96
AEG washing machine displays error code E96: hardware configuration error.
Incompatible Hardware Detected
E97
AEG washing machine displays error code E97: program selector / UI mismatch.
User Interface / Program Selector Error
E98
AEG washing machine displays error code E98: severe motor control error.
Motor Control Module Fault
Symptom
AEG washing machine does not drain completely; a small amount of water is left in the drum after the cycle; no error code.
Partial Drain / Slow Pumping
Symptom
AEG washing machine door will not open at the end of the cycle; no error code is displayed.
Door Stuck Closed
Symptom
AEG washing machine drum does not turn at all during wash or spin, but the machine fills and drains normally; no error code.
Drive Belt or Motor Failure
Symptom
AEG washing machine drum scrapes or makes metallic grinding noises when turned by hand; no error code is displayed.
Foreign Object Between Drum and Tub
Symptom
AEG washing machine emits a burning smell or smoke during operation; no error code.
Overheating Component / Electrical Short
Symptom
AEG washing machine emits a sewage or rotten egg smell from the drain hose or during draining; no error code.
Drain System Odor
Symptom
AEG washing machine has a strong musty or moldy smell inside the drum and on clothes; no error code.
Biofilm / Mold Build-Up
Symptom
AEG washing machine is leaking water from the front door area during the wash or rinse cycle; no error code is displayed.
Door Seal (Bellow) Leak
Symptom
AEG washing machine leaks water from the rear or bottom during the drain or spin cycle; no error code is displayed.
Sump Hose or Pump Housing Leak
Symptom
AEG washing machine leaves clothes very wet at the end of the cycle; the spin seems weak; no error code.
Poor Spin Performance
Symptom
AEG washing machine leaves visible detergent or softener residue on clothes after washing; no error code.
Poor Rinsing / Detergent Dispensing Issue
Symptom
AEG washing machine makes a very loud rumbling or roaring noise during the spin cycle, even when empty; no error code is displayed.
Drum Bearings Worn or Failed
Symptom
AEG washing machine produces a loud banging or knocking sound during the spin cycle, especially with heavy loads; no error code is displayed.
Excessive Vibration / Suspension Fault
Symptom
AEG washing machine takes much longer than the displayed time to complete a cycle; no error code.
Extended Cycle Time / Auto-Adjustment
Symptom
AEG washing machine will not start a cycle; the display is on, but pressing start does nothing; no error code.
User Interface / Start Inhibit
Symptom
AEG washing machine will not start at all; no lights or display, no error code.
No Power / Main Supply Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E10 |
Washer does not fill with water or fills very slowly, E10 displayed on AEG washing machine
|
Water Inlet Timeout / Filling Fault | View Details |
| E11 |
Washer does not fill with water at all, E11 displayed on AEG washing machine
|
No Water Fill Detected | View Details |
| E13 |
AEG washing machine shows E13 and may stop mid-cycle, sometimes with water under or inside the base of the machine
|
Water Leakage in Base / Anti-Flood Activated | View Details |
| E20 |
The AEG washing machine does not drain or stops with water in the drum, and E20 is displayed.
|
Drain Pump / Drainage Fault | View Details |
| E21 |
The AEG washer shows E21 and will not drain properly, often with a loud humming sound from the pump.
|
Drain Pump Blocked or Jammed | View Details |
| E23 |
The AEG washing machine displays E23 and may not start or may stop mid-cycle with water inside.
|
Drain Pump Triac / Pump Control Fault | View Details |
| E24 |
The AEG washer shows E24, often related to drain pump control or wiring issues.
|
Drain Pump Feedback / Wiring Error | View Details |
| E30 |
The AEG washing machine shows E30 and will not start or stops with the pump running continuously.
|
Water Leakage / Anti-Flood System Activated | View Details |
| E31 |
The AEG washer displays E31 and may not fill or may overfill slightly before stopping.
|
Pressure Sensor / Water Level Sensor Fault | View Details |
| E32 |
The AEG washing machine shows E32, often during or after filling, sometimes with incorrect water levels.
|
Pressure Sensor Calibration / Signal Error | View Details |
| E33 |
The AEG washer displays E33 and may not heat or may stop during a wash cycle.
|
Pressure Switch / Heater Interlock Fault | View Details |
| E34 |
The AEG washing machine shows E34 and may refuse to start heating or may abort the cycle.
|
Pressure Switch / Safety Level Conflict | View Details |
| E35 |
AEG washer overfills or displays E35, sometimes with water visible in the door glass above the normal level.
|
Overfill / Overpressure Fault | View Details |
| E38 |
AEG washing machine shows E38, often associated with poor rinsing or incorrect water levels.
|
Blocked Pressure Chamber / Air Trap | View Details |
| E40 |
AEG washer will not start and shows E40 or a door symbol; the door may not lock.
|
Door Lock / Interlock Fault | View Details |
| E41 |
AEG washing machine shows E41; the door appears closed, but the machine thinks it is open.
|
Door Not Properly Closed Signal | View Details |
| E42 |
AEG washer shows E42; the door may not unlock at the end of the cycle.
|
Door Unlock Fault | View Details |
| E43 |
AEG washing machine shows E43 and will not start; this is often related to door lock control.
|
Door Lock Triac / Control Fault | View Details |
| E44 |
AEG washer shows E44, a door status signal error.
|
Door Status Sensor Fault | View Details |
| E45 |
AEG washing machine displays E45, an advanced door lock control error.
|
Door Lock Control Circuit Fault | View Details |
| E50 |
AEG washer shows an E50 series error, often with the drum not turning or intermittent spinning.
|
Motor / Motor Control General Fault | View Details |
| E51 |
AEG washing machine shows E51; the drum does not rotate, and it sometimes trips the breaker.
|
Motor Power Triac Short Circuit | View Details |
| E52 |
AEG washer shows E52; the drum may turn erratically or not reach full spin speed.
|
Tachometer Signal Fault | View Details |
| E53 |
AEG washing machine shows E53, motor control error.
|
Motor Control Circuit Fault | View Details |
| E54 |
AEG washer shows E54, drum may not reverse or may stop abruptly.
|
Motor Relay Stuck / Fault | View Details |
| E60 |
AEG washing machine shows E60 series error, clothes come out cold, and the cycle may take longer than normal.
|
Heating System General Fault | View Details |
| E61 |
AEG washer shows E61, water does not reach set temperature within expected time.
|
Heating Time-Out | View Details |
| E62 |
AEG washing machine shows E62, water overheats, possible steam from door.
|
Overheating / Overtemperature Fault | View Details |
| E66 |
AEG washer shows E66, no heating, sometimes with clicking noises from control board.
|
Heater Relay Fault | View Details |
| E70 |
AEG washing machine shows E70 series error, often related to temperature sensing.
|
NTC Temperature Sensor General Fault | View Details |
| E90 |
AEG washer shows E90 or E9x codes; the machine may not start or may behave erratically.
|
Communication / Configuration Error | View Details |
| E91 |
AEG washing machine shows E91, display may be blank or unresponsive.
|
No Communication with User Interface | View Details |
| E92 |
AEG washer shows E92, often after replacing a control board or UI.
|
Configuration Mismatch | View Details |
| E93 |
AEG washing machine displays error code E93: configuration error.
|
Invalid Configuration Data | View Details |
| E94 |
AEG washing machine displays error code E94: program configuration error.
|
Program Data Corruption | View Details |
| E95 |
AEG washing machine displays error code E95: internal communication error.
|
Internal Control Board Communication Fault | View Details |
| E96 |
AEG washing machine displays error code E96: hardware configuration error.
|
Incompatible Hardware Detected | View Details |
| E97 |
AEG washing machine displays error code E97: program selector / UI mismatch.
|
User Interface / Program Selector Error | View Details |
| E98 |
AEG washing machine displays error code E98: severe motor control error.
|
Motor Control Module Fault | View Details |
| – |
AEG washing machine does not drain completely; a small amount of water is left in the drum after the cycle; no error code.
|
Partial Drain / Slow Pumping | View Details |
| – |
AEG washing machine door will not open at the end of the cycle; no error code is displayed.
|
Door Stuck Closed | View Details |
| – |
AEG washing machine drum does not turn at all during wash or spin, but the machine fills and drains normally; no error code.
|
Drive Belt or Motor Failure | View Details |
| – |
AEG washing machine drum scrapes or makes metallic grinding noises when turned by hand; no error code is displayed.
|
Foreign Object Between Drum and Tub | View Details |
| – |
AEG washing machine emits a burning smell or smoke during operation; no error code.
|
Overheating Component / Electrical Short | View Details |
| – |
AEG washing machine emits a sewage or rotten egg smell from the drain hose or during draining; no error code.
|
Drain System Odor | View Details |
| – |
AEG washing machine has a strong musty or moldy smell inside the drum and on clothes; no error code.
|
Biofilm / Mold Build-Up | View Details |
| – |
AEG washing machine is leaking water from the front door area during the wash or rinse cycle; no error code is displayed.
|
Door Seal (Bellow) Leak | View Details |
| – |
AEG washing machine leaks water from the rear or bottom during the drain or spin cycle; no error code is displayed.
|
Sump Hose or Pump Housing Leak | View Details |
| – |
AEG washing machine leaves clothes very wet at the end of the cycle; the spin seems weak; no error code.
|
Poor Spin Performance | View Details |
| – |
AEG washing machine leaves visible detergent or softener residue on clothes after washing; no error code.
|
Poor Rinsing / Detergent Dispensing Issue | View Details |
| – |
AEG washing machine makes a very loud rumbling or roaring noise during the spin cycle, even when empty; no error code is displayed.
|
Drum Bearings Worn or Failed | View Details |
| – |
AEG washing machine produces a loud banging or knocking sound during the spin cycle, especially with heavy loads; no error code is displayed.
|
Excessive Vibration / Suspension Fault | View Details |
| – |
AEG washing machine takes much longer than the displayed time to complete a cycle; no error code.
|
Extended Cycle Time / Auto-Adjustment | View Details |
| – |
AEG washing machine will not start a cycle; the display is on, but pressing start does nothing; no error code.
|
User Interface / Start Inhibit | View Details |
| – |
AEG washing machine will not start at all; no lights or display, no error code.
|
No Power / Main Supply Fault | View Details |
No matching codes found
Advertisements